You have a grading report in one hand and a shiny stone in the other. How do you know they belong together? For most loose diamonds sold today, the answer is a laser-inscribed number etched onto the thin edge of the stone, called the girdle. It is small, usually invisible to the naked eye, but it quietly links your diamond to its report for life.

A laser inscription is not a branding mark and it does not damage the diamond. A focused beam of light burns a microscopic line into the girdle's surface coating, leaving characters that sit below the depth of the cut. Think of it as writing your name on the rim of a glass with a fine-tip pen. The diamond's structure, hardness, and appearance are completely unaffected.
What the inscription actually says
Most inscriptions carry the report number issued by the laboratory. A GIA diamond, for example, shows a 10-digit number preceded by the GIA logo. An IGI stone typically shows its own report number, sometimes alongside a brand logo such as Forevermark or a retailer's own mark. Inscriptions can also carry descriptive grading like "Laser Inscription: GIA 1234567890" or marketing text such as a promise phrase on branded stones.
The important point is that the number should match, character for character, the number printed on the front of your certificate. If the report says GIA 6123456789, the girdle should read exactly that.
Why buyers should care
Diamonds of the same weight and colour look almost identical side by side. Without an inscription, swapping stones between settings is distressingly easy. The inscription is the deterrent and the proof. When you leave your ring for a rhodium clean, a prong tighten, or a resize, the number lets you confirm the same stone comes back to you. It is also what an insurer or valuer will look for when verifying a claim, which ties directly into the advice in our guide to jewellery insurance.
How to verify it yourself
You will not read the girdle with the naked eye. You need a 10x loupe held very close, or better still, a jeweller's microscope. Many independent jewellers will hold a diamond under their scope and read the inscription aloud to you while you compare it with the report. When you buy a stone, ask for this check before you leave the shop — it takes under a minute.
For online verification, both GIA and IGI let you enter the report number on their websites. Entering the number pulls up the laboratory's own copy of the report, so you can confirm the weight, colour, clarity, and cut all match the paper version in your hand. A mismatch in any field is a red flag worth raising immediately. This is the same habit we recommend in comparing two diamond certificates, but applied to a single stone.
Common questions
Is an inscription on every diamond? No. Small melee (the tiny stones in a halo or pavé) are rarely inscribed, and some dealers choose not to mark larger stones. If a stone arrives without an inscription but the report has a number, ask why — the lab can confirm via its own archive.
Can the inscription wear off? No. It is etched into the surface, not printed. Years of wear will not erase it, although a heavy repolish at a jeweller could, in theory, remove a very shallow mark — another reason to keep your paperwork safe.
Does it add value? Not directly. The diamond is priced on the four Cs, not the mark. The inscription adds security and trust, which is its real value.
If you inherited an un-inscribed stone
Family heirloom diamonds often predate laser inscription, and that is fine. A respected gem lab can still identify a stone by its proportions and its inclusion map, comparing what sits in the ring against the old paperwork. If no paperwork exists, a new report can be issued and an inscription added afterwards if you want one. This is worth doing before you rely on the stone for insurance or resale, because an unmarked diamond is harder to prove if it is ever lost or swapped. The process is the same one covered in appraisal and probate valuations.
When the number does not match
If you cannot read the girdle, or the number you do read differs from the report, stop and ask the seller to explain. A reputable dealer will resolve it under their own microscope in front of you. A refusal to show you the stone is a signal to walk away. For extra context on choosing a trustworthy seller, read where to buy an engagement ring.
Gemstone grading terminology used here follows the Gemological Institute of America’s gem encyclopedia.
Related Reading
- I1, I2, I3 Clarity: What Included Diamonds Actually Mean
- Diamond Table and Depth Percentages: What the Numbers Actually Mean
- VS1 vs VS2 Diamond Clarity: Which Grade to Buy
Frequently Asked Questions
Is moissanite a good diamond alternative for retail buyers?
Yes for price-sensitive customers who want brilliance and hardness. Moissanite ranks 9.25 on the Mohs scale, holds up to daily wear and costs a fraction of a natural diamond of the same size, so it resells fast in bridal and fashion lines.
What is the minimum order for wholesale moissanite?
MOQ starts at 50 pieces per design for stock items. Custom cuts and private-label settings usually start at 100–300 pieces depending on the mold.
Do you provide certificates with moissanite stones?
Yes. Every parcel ships with GRA or IGI documentation listing carat weight, color grade and cut. We recommend passing the certificate to your end customer for trust.
How long does sample and bulk production take?
Samples ship in 3–5 days. Bulk runs take 15–20 days under 500 pieces, and 25–30 days for custom work.