Ring Size Guide: US, UK, EU and Japanese Size Chart
Use this guide to measure a ring size at home and convert between US, UK, EU and Japanese sizing systems. The chart below covers US sizes 3 through 13.5 in half sizes, with inside circumference and inside diameter in millimeters. For wholesale and private-label buyers, ring sizer tools and branded size charts can be arranged through sales.
How to Measure Your Ring Size at Home
- Cut a thin strip of paper or a length of non-stretchy string and wrap it snugly around the base of the finger where the ring will sit.
- Mark the point where the strip or string overlaps, then measure the length in millimeters with a ruler. That length is the inside circumference.
- Compare the circumference to the chart below and read across to the matching US, UK, EU and Japanese size.
- If the measurement falls between two sizes, choose the larger size, especially for wide bands.
Measurement tips
- Measure at the end of the day, when fingers are slightly warmer and a little larger; fingers swell in warm temperatures and shrink in cold.
- If your knuckle is much larger than the finger base, measure both, then choose a size that slides over the knuckle comfortably and sits snugly on the base.
- Measure two or three times to confirm the result; do not use a stretchy ribbon, which can compress and give a smaller reading.
- For comfort with wide bands, size up by about half a size; wide bands fit tighter than thin bands on the same finger.
Ring Size Conversion Chart (US 3 – 13.5, Half Sizes)
Values are standard industry approximations; manufacturing tolerance and band width can shift the fit slightly. Confirm with a physical ring sizer before a custom order.
| US Size | UK Size | EU Size | JP Size | Inside Circumference (mm) | Inside Diameter (mm) |
|---|---|---|---|---|---|
| 3 | F | 44 | 3 | 44.2 | 14.1 |
| 3.5 | G | 45.5 | 4 | 45.5 | 14.5 |
| 4 | H | 47 | 5 | 46.8 | 14.9 |
| 4.5 | I | 48 | 6 | 48.0 | 15.3 |
| 5 | J | 49.5 | 7 | 49.3 | 15.7 |
| 5.5 | K | 51 | 8 | 50.6 | 16.1 |
| 6 | L | 52 | 9 | 51.9 | 16.5 |
| 6.5 | M | 53.5 | 10 | 53.1 | 16.9 |
| 7 | N | 55 | 11 | 54.4 | 17.3 |
| 7.5 | O | 56.5 | 12 | 55.7 | 17.7 |
| 8 | P | 57.5 | 13 | 57.0 | 18.1 |
| 8.5 | Q | 59 | 14 | 58.3 | 18.5 |
| 9 | R | 60.5 | 15 | 59.5 | 18.9 |
| 9.5 | S | 62 | 16 | 60.8 | 19.3 |
| 10 | T | 63 | 17 | 62.1 | 19.7 |
| 10.5 | U | 64.5 | 18 | 63.4 | 20.1 |
| 11 | V | 66 | 19 | 64.6 | 20.5 |
| 11.5 | W | 67 | 20 | 65.9 | 20.9 |
| 12 | X | 68.5 | 21 | 67.2 | 21.3 |
| 12.5 | Y | 70 | 22 | 68.5 | 21.7 |
| 13 | Z | 71 | 23 | 69.7 | 22.1 |
| 13.5 | Z1 | 72.5 | 24 | 71.0 | 22.5 |
Wide Band Sizing Note
Rings with a wide band (approximately 5 mm and wider) sit tighter than a thin band on the same finger because more metal presses against the skin. If you are ordering a wide wedding band, half-eternity band or statement ring, measure your finger and then size up by about half a size. If you are between two sizes, choose the larger one for a wide band. Comfort-fit inner bands can feel slightly roomier than flat inner bands; mention the band style when you request a custom size.
Bracelet Size Guide
Bracelet size is determined by measuring the wrist snugly with a soft tape, then adding 2–3 centimeters to that measurement for a comfortable fit. A tighter fit uses the smaller addition; a looser fit uses the larger addition. When a measurement falls between two options, choose based on preferred wear: closer to the wrist for a snug look, looser for movement and charm stacking.
- A new bracelet may feel stiff and snug at first; it softens and becomes more flexible with wear.
- More charms or links added to a bracelet make it feel tighter over time, so allow extra room when planning a charm bracelet.
- For wholesale bracelet orders, wrist range and size availability are confirmed in the quotation.
Necklace Length Guide
Necklace length is measured end to end, including the clasp. Choose a length based on where you want the necklace to sit on the neck and chest:
- 16 inches (40 cm): rests close to the base of the neck, a choker-style fit.
- 18 inches (45 cm): sits at the collarbone, the most common women's pendant length.
- 20 inches (50 cm): falls just below the collarbone, suitable for pendants worn over a blouse or layered over shorter chains.
Layering: when stacking several necklaces, choose slightly different lengths so each chain and pendant sits clearly without tangling. For an uncertain choice, wrap a string or tape around the neck at the desired position and measure it before ordering.
Request a Free Ring Sizer
Still unsure about a size? Contact our customer service team to request a free ring sizer for yourself or your retail customers. Wholesale buyers can ask about branded size charts and sizer packs for their packaging.
Wholesale Order Terms
Minimum order quantity
MOQ starts at 5 pieces per ready-stock style; OEM/ODM custom rings follow a quoted minimum order set in the order agreement.
Lead time
Ready-stock orders are prepared within 2–5 business days after confirmation. Custom, OEM and ODM projects follow a quoted lead time of 15–30 days, depending on design, metal, stone availability and order size.
Pricing basis
Pricing is quoted per piece or per carat according to stone, metal weight, setting and finish. After you send styles, stone and quantity, our sales team returns a written price list and price range for the proposed order.
Payment terms
We accept T/T bank transfer, PayPal and Western Union. Custom and OEM/ODM orders require an agreed 30% deposit, with the balance paid before shipment; bulk and private-label payment terms are confirmed in the order agreement.
Frequently Asked Questions for Wholesale Buyers
What is the minimum order quantity (MOQ) for wholesale orders?
We keep our wholesale MOQ low, but the exact minimum is quoted on request rather than fixed on this page. Ready-stock styles can usually be ordered in small mixed batches across categories; OEM, ODM, private-label and custom packaging runs carry their own minimums depending on tooling, branding and quantity. After you send your selected styles or categories and estimated quantities, our sales team confirms the MOQ, mixed-batch options and unit price in a written quotation. Any fixed number quoted on a proposal applies to that specific order only.
How long does production take for a custom or OEM/ODM order?
Ready-stock orders are picked, inspected and packed within 2–5 business days after confirmation, subject to availability. Custom, OEM and ODM orders follow a longer quoted schedule because the project includes consultation, 3D modeling, prototype approval, production and final inspection. The total lead time depends on design complexity, metal, stone availability, setting type and order size; we state the expected production window in your quotation after reviewing the brief. No fixed production day count is promised publicly because each project differs, and sample approval always precedes bulk production.
Do you offer samples before bulk production?
Yes. Sample-first cooperation is standard for custom, OEM and ODM projects. For ready-stock wholesale, buyers may order a small sample batch to check quality, finish and packaging before committing to a larger order. A sample or prototype cost may apply to custom designs; that cost and whether it is credited toward a later bulk order are stated in the quotation. We recommend approving the physical sample or prototype before production begins, because changes made after approval can affect cost and lead time.