If you have ever stared at a diamond grading report, the list of measurements on the left edge can look like a foreign language. Table, depth, crown angle, pavilion angle, girdle, culet. Most buyers fixate on the four Cs and ignore this block, yet the proportions it describes are what decide whether a diamond returns light to your eye or swallows it. Depth percentage is the first proportion worth understanding because it sets the stage for everything else.
Depth percentage is simply the total thickness of the diamond divided by its average diameter, multiplied by 100. Measure the stone from the flat table facet on top down to the sharp point (or facet) at the bottom, then divide that figure by the stone's width across the girdle. The result is a percentage. A 6.5 mm round diamond that measures 4.0 mm from table to culet works out to roughly 61.5% depth. You do not need the math day to day; the lab prints the number for you.
The reason depth matters is geometry. Light enters through the crown, bounces off the pavilion facets, and exits back through the table to create the sparkle you see. If the pavilion is too deep, light strikes the bottom facets at the wrong angle and leaks out the side rather than returning upward. If the pavilion is too shallow, light escapes through the bottom in the first place. Depth percentage is a quick summary of whether those angles are plausibly in range.
What the ideal range actually looks like
For a standard round brilliant, most modern grading systems treat a depth percentage between about 59% and 63% as comfortably within the ideal or very good band. The classic Tolkowsky ideal sits near 59.3%, and GIA's Excellent cut grade typically accepts stones up to roughly 62.9% depth. That window is not a rulebook, though; it is a summary of what laboratories have found tends to perform well when paired with the right crown angle and table size.
Notice the word paired. Depth percentage on its own is almost meaningless. A diamond with 62% depth but a crown angle of 40 degrees and a tiny table can behave very differently from a 62% depth stone with a 32-degree crown and a wide table. The table percentage and the measured angles tell the rest of the story. This is why labs publish a holistic cut grade rather than a pass/fail stamp on depth alone.
Too deep: the nail-head look
When depth climbs past roughly 64% on a round, the pavilion becomes steep. The stone begins to look darker through the face-up view because light is leaking out the lower half. Jewellers call this the nail-head effect: the centre looks deep and dark, almost like the head of a nail, and the stone appears smaller for its carat weight. A 1.2-carat diamond with an over-deep pavilion can look the size of a 0.9-carat ideal stone when viewed from above. That is a poor trade because you paid for weight you cannot see.
Deep stones also tend to carry more bulk below the girdle, which means the setting must cover a taller pavilion. Prongs may sit awkwardly and the ring can sit high on the finger. If you are comparing two stones of the same carat price, the deeper one is usually the worse value even if the per-carat number looks tempting.
Too shallow: the fish-eye
The opposite problem appears when depth drops below about 56%. A shallow pavilion lets light escape through the bottom before it can bounce back. The most obvious symptom is a dark reflection of the culet visible through the table, looking like the pupil of a fish. Buyers refer to this as the fish-eye effect, and it is most common in very thin, spread-out stones that look larger than their weight suggests.
These spread stones are the value trap of the diamond world. A shallow 1.5-carat can look as big as a well-cut 1.7-carat, but it lacks the contrast and liveliness that makes a diamond look alive. In bright sunlight the difference becomes obvious, and once you have seen it you cannot unsee it.
Fancy shapes play by different rules
Round brilliants are the only shape with a deeply researched ideal set of proportions. For ovals, pears, cushions, emeralds and radiants, depth percentage targets shift because the stones are not round and the length-to-width ratio changes the optics. An emerald cut, for example, often looks best slightly deeper, around 60% to 65%, because its step-cut design relies on contrast and a hall-of-mirrors effect rather than the fiery scatter of a brilliant.
Ovals and pears need extra attention to depth because of the bowtie shadow that can form across the centre. A slightly deeper pavilion can help, but depth alone will not fix a poorly cut outline. Always judge fancy shapes by looking at the actual stone or high-quality video rather than trusting a single number.
How to use the number on your report
Treat depth percentage as a filter, not a verdict. When you open a report, glance at the depth figure first. If a round sits between 59% and 63%, you are in a safe zone and can move on to the cut grade, table and angles. If it sits above 64% or below 56%, ask the jeweller to explain how the other proportions compensate, and insist on seeing the stone under a directional light. Compare the numbers against an ideal proportion guide rather than chasing a single magic figure.
The goal is never a perfect depth percentage. The goal is a stone that flashes with contrast, looks its true size, and returns most of the light that hits it. Depth percentage is one instrument in the measuring kit, and like any instrument it is only useful when read alongside the rest of the gauges. Spend a few minutes learning it, and the block of numbers on the report stops looking like code and starts reading like the story of how the stone was cut.
The Gemological Institute of America’s gem encyclopedia is an authoritative, widely cited reference on moissanite and diamond quality factors.
Related Reading
- I1, I2, I3 Clarity: What Included Diamonds Actually Mean
- Diamond Table and Depth Percentages: What the Numbers Actually Mean
- VS1 vs VS2 Diamond Clarity: Which Grade to Buy
Frequently Asked Questions
Is moissanite a good diamond alternative for retail buyers?
Yes for price-sensitive customers who want brilliance and hardness. Moissanite ranks 9.25 on the Mohs scale, holds up to daily wear and costs a fraction of a natural diamond of the same size, so it resells fast in bridal and fashion lines.
What is the minimum order for wholesale moissanite?
MOQ starts at 50 pieces per design for stock items. Custom cuts and private-label settings usually start at 100–300 pieces depending on the mold.
Do you provide certificates with moissanite stones?
Yes. Every parcel ships with GRA or IGI documentation listing carat weight, color grade and cut. We recommend passing the certificate to your end customer for trust.
How long does sample and bulk production take?
Samples ship in 3–5 days. Bulk runs take 15–20 days under 500 pieces, and 25–30 days for custom work.