A small ultrasonic cleaner costs £30–£60 online and looks like a miracle. It shakes loose grease from under claws in three minutes. It is genuinely useful — but it is not safe on every ring, and the difference between a clean solitaire and a cracked stone is one wrong switch. This is the safe list and the warning list.
How they work
The tank holds warm soapy water and a transducer creates high-frequency sound waves, which generate tiny bubbles that implode against the jewellery and shift grease. The cleaning action is mechanical. That is why it works on hard, dense stones — diamond, sapphire, ruby — and why it can be a problem on stones with feathers, fractures or porous structures.
What is safe to ultrasonic
- Diamond solitaire: safe, in a well-made setting. This is what the machine is for.
- Sapphire and ruby: safe, provided they are not fracture-filled.
- Moissanite: generally safe, but check the setting — vibration can loosen pavé.
- Plain gold or platinum bands: safe.
What is NOT safe
| Stone / setting | Risk | Safer alternative |
|---|---|---|
| Emerald, opal, pearl | Porous or fractured; can crack | Soft brush, lukewarm water |
| Treated / fracture-filled diamond | Heat and vibration can destroy filling | Manual clean only |
| Pavé or micro-set bands | Vibration loosens tiny stones | Manual clean |
| Antique or glued settings | Heat weakens old adhesives | Take it to a jeweller |
| Tanzanite, fluorite, opal | Heat shock and fragility | Manual clean only |
How to use one safely
What detergent to use
Use a drop of mild washing-up liquid in warm water. Do not use jewellery-specific 'formulations' that cost £10 a bottle — they are the same active ingredients at a premium. Never use bleach, vinegar, or ammonia-based cleaners in an ultrasonic: they attack some metal alloys and can discolour porous stones. A clean tank with plain warm water and a drop of Fairy does the job that the expensive solutions do.
How often, and for how long
Once a month is plenty. Over-cleaning does not harm a diamond solitaire, but running the machine for ten minutes at a time is unnecessary — three minutes removes the grease. After the cycle, brush under the claws with a soft toothbrush, rinse in lukewarm water with the sink plugged, and inspect the claws. If any stone looks like it has shifted, stop the home-cleaning routine and take the ring to a jeweller; vibration has done its job of revealing a loose setting.
The machine itself
A £30 machine from a reputable UK seller does the same job as a £150 jeweller's bench unit for home use. Look for a stainless-steel tank and a timer. Avoid the very cheapest plastic-bodied units, which heat unevenly. Empty and dry the tank after each use — standing water in an ultrasonic grows a film you do not want on your ring.
When to skip the machine entirely
If the ring has a loose stone, a wobbly claw, or a pavé setting you are unsure about, do not put it in an ultrasonic. Vibration will do exactly what it is designed to do — shift things — and a loose stone that would have survived a careful brush clean may drop out in the tank. Take it to a jeweller for a steam clean and a claw check first. Once the setting is confirmed tight, the home machine is safe again.
The results, and when it is not working
After a good cycle, a diamond solitaire should look as bright as the day it was bought. If it still looks dull, the cause is usually one of two things: a build-up of hand cream that needs a longer soak, or a setting that has started to trap grease underneath. Neither is damage. Soak overnight in warm soapy water if a single cycle is not enough; if the stone still reads dull after that, take it in for a professional clean, because the issue is the setting, not the cleaning method.
A home ultrasonic is a genuinely useful tool for a durable solitaire, and it costs less than one professional clean a year. But it is a tool for the right stones only. If your ring contains anything porous, treated, pavé, antique or fragile, the soft brush and warm water method is the safe default. When in doubt, leave the machine in the box and let a jeweller steam it for you.
Use hand-warm water with a drop of mild detergent, never boiling water. Run the shortest cycle — three minutes is enough. Remove the ring and brush under the claws with a soft toothbrush, then rinse. Inspect the claws after each use; if any feel loose, stop and take the ring in. For everyday upkeep that does not need a machine, our home jewellery care guide covers the soap-and-brush method in detail.
For third-party reference, the Wikipedia article on moissanite details moissanite’s discovery, optical properties and use in jewellery.
Related Reading
- Sweat and Jewelry: Which Metals Survive Everyday Wear
- Cleaning Jewelry: Which Cloths Actually Scratch Your Pieces
- Cleaning Moissanite: Why Toothpaste Is the Wrong Cleaner
Frequently Asked Questions
What care instructions should I give end customers?
Remove jewelry before swimming, cleaning or applying perfume. Store dry in a sealed bag. Clean with mild soap and a soft brush, then dry fully.
How often does rhodium plating need renewal?
Every 12–18 months under daily wear. Offer a re-plating service to your customers to build repeat visits.
Does chlorine damage sterling silver?
Yes. Chlorine and saltwater accelerate tarnish and can pit the surface. Rinse and dry immediately after any contact.
What causes green skin marks?
Copper or nickel in the base alloy reacting with sweat. Switch to 316L, titanium or sterling, and specify nickel-free plating.