One of the most common questions people ask before buying moissanite is blunt: "Will it pass a diamond tester?" The short answer is yes — most handheld thermal testers will read moissanite as diamond, because both materials move heat through their crystal lattice extremely efficiently. That surprises a lot of shoppers, and it surprises them in both directions: people hoping to pass the stone off as diamond are relieved, while people trying to verify a diamond worry that cheap testers are unreliable.

How a diamond tester actually works

The familiar pen-shaped diamond tester you see in jewellers' workshops is a thermal probe. It heats a tiny tip, presses it against the stone, and measures how quickly the heat flows away from the tip into the material. Diamond has one of the highest thermal conductivities of any natural substance — far higher than glass, cubic zirconia, white sapphire or most simulants. That high thermal conductivity is what triggers the "diamond" beep.

The problem is that moissanite (silicon carbide) also has extremely high thermal conductivity, very close to diamond. To a basic thermal tester, the two materials look nearly identical. The pen beeps for moissanite the same way it beeps for a real diamond.

Why professional jewellers use a two-step test

Serious jewellers do not rely on a single thermal pen. Modern professional testers add an electrical-conductivity step. Diamond is normally an electrical insulator (with the rare exception of Type IIb blue diamonds, which contain boron). Moissanite, by contrast, is electrically conductive. So after the thermal test says "diamond," the jeweller flips the tester to the conductivity mode and touches the stone again. If the conductivity reading jumps, the stone is almost certainly moissanite, not diamond.

That two-step workflow is why a moissanite ring is very hard to pass off as diamond in a professional jewellery shop, even though it passes the cheap pen test you might buy online for $20.

The other giveaway: double refraction

Thermal testers are not the only tool in the box. Moissanite is doubly refractive, while diamond is singly refractive. Under a 10x loupe, a trained eye can look through the pavilion facets of a moissanite and see the edges of the opposite facets doubled. In a diamond, those edges stay single and sharp. Our detailed guide to facet doubling in moissanite shows what this looks like and how to spot it yourself.

This is why an experienced jeweller can often tell moissanite from diamond in seconds, even without a tester. The visual signature is consistent once you know what to look for.

What this means for buyers

If you are buying moissanite, the tester result is mostly irrelevant. You are not trying to fool anyone — you bought the stone openly, and you have the certificate. The question of whether it passes a pen test only matters if you are worried about a third party (a jeweller, a pawnbroker, an insurance assessor) misidentifying it.

If you are buying a diamond and want to be sure it is real, do not rely on a cheap thermal pen alone. Ask the seller for a laboratory report (GIA, IGI or GCAL), verify the report number on the lab's website, and then confirm in person with a jeweller who uses both thermal and conductivity testing. Our article on moissanite vs diamond walks through the broader comparison.

Lab-grown diamonds also pass testers

Worth knowing: lab-grown diamonds are real diamonds, and they pass every diamond tester, thermal or electrical. A tester cannot separate a mined diamond from a lab-grown one. That distinction is made by the lab through spectroscopy, and it is recorded on the certificate — which is why the laser inscription "Laboratory Grown" matters on the girdle. If you are trying to understand whether a stone on offer is natural or created, the certificate, not a pen, is the source of truth. Our how moissanite is made article explains why its growth process is entirely different from diamond creation.

What to do if an insurer or jeweller questions the stone

If you take a moissanite ring in for insurance, cleaning or repair, there is no need to hide what it is. Tell the jeweller up front. They will recognise the material quickly — usually by the doubled facets under a loupe — and price the work accordingly. Insuring a moissanite ring is straightforward, because the replacement cost is based on what you actually paid, not on diamond pricing. Our guide to moissanite ring insurance walks through how to list it correctly on your policy.

The bottom line

Moissanite passes most consumer-grade diamond testers because both materials conduct heat extremely well. Professional jewellers catch it with a second, electrical-conductivity test or by spotting the doubled facets under a loupe. If you are buying moissanite honestly, this is a non-issue; if you are verifying a diamond, trust the certificate and a multi-step jeweller test rather than a cheap pen.

The Gemological Institute of America’s gem encyclopedia is an authoritative, widely cited reference on moissanite and diamond quality factors.

Related Reading

Frequently Asked Questions

Is moissanite a good diamond alternative for retail buyers?

Yes for price-sensitive customers who want brilliance and hardness. Moissanite ranks 9.25 on the Mohs scale, holds up to daily wear and costs a fraction of a natural diamond of the same size, so it resells fast in bridal and fashion lines.

What is the minimum order for wholesale moissanite?

MOQ starts at 50 pieces per design for stock items. Custom cuts and private-label settings usually start at 100–300 pieces depending on the mold.

Do you provide certificates with moissanite stones?

Yes. Every parcel ships with GRA or IGI documentation listing carat weight, color grade and cut. We recommend passing the certificate to your end customer for trust.

How long does sample and bulk production take?

Samples ship in 3–5 days. Bulk runs take 15–20 days under 500 pieces, and 25–30 days for custom work.