Diamonds & 4Cs Supplier Vetting: Factory or Trading Desk

A 32-door accessory chain in Columbus asked for 500 diamonds at a landed price of $4.20 and the second order came back at $5.60 because the first quote excluded plating thickness and stone matching, and the buyer had already published a $9.99 retail price. The order was not lost on price. It was lost on a specification nobody wrote down. This piece looks at diamonds & 4cs from the buyer's side of the table: what the promise means at the bench, what it costs to get it wrong, and how to write a brief a factory can be held to.

Why the Quoted Unit Price Almost Never Survives the First Reorder

The number that kills a wholesale programme is not the unit price. It is the second unit price. A quote that assumes one plating lot, one stone parcel and one production run is a quote for one order, not for a year of reorders.

We publish the cost stack so a buyer can see which line moves. That is the only way to keep a retail price stable while metal and stone costs move underneath it.

What the Industry Standard Delivers, and Where It Breaks

The default offer in this category is a stock photo, a unit price and a thirty-day promise. That works for one order and stops working on the second, because a stock photo cannot specify 10 mohs.

ComparisonCommon practiceWhat we holdWhy it matters
Cost lineCommon quoteOur quote
Base metalspot + 8%spot + fixed fabrication, locked quarterly
Platingnot itemised0.05-0.10 micron rhodium, priced per piece
Stone matchingflat allowanceparcel graded, priced on hue band
Setting labourhidden in unit priceper-operation, visible on the sheet

How We Build a Price That Holds for Twelve Months

Certificate-to-stone traceability is the number we publish per lot. It is the one a buyer can check with a caliper and a loupe in ten minutes, and the one that decides whether a reorder is a formality or a negotiation.

  • Lot and rack reference on every carton
  • 10 mohs declared on the invoice, not assumed
  • One plated sample approved per rack before the run
  • Stone parcel photographed and hue band stated in writing

Sampling Plan and the AQL We Work To

We inspect at AQL 2.5 on the final line and 3 to 5 per cent on setting, sampled per carton rather than per lot. Per-carton sampling is stricter because a defect that clusters in one carton is a process problem, not a random one.

Anything above the AQL is held and reworked before packing. We do not sort after arrival, because sorting after arrival is a cost the buyer pays and a defect the buyer discovers in front of a customer.

What the Buyer Can Verify in Ten Minutes

At the receiving table: count per SKU against the packing list, weigh three pieces, measure the lab grown diamond, check one stone at 10x for seat and tilt, and confirm the plating colour against an approved sample.

Five checks, ten minutes. They catch the defects that are visible on day one and free the buyer to argue about the ones that are not, with evidence rather than impression.

Specification, Field by Field

Read the specification as a checklist: 10 Mohs, refractive index 2.42, HPHT or CVD growth, IGI or GIA graded, D to H colour. Each comma is a decision someone made, and each decision has a cheaper alternative that a factory can substitute without telling you.

The substitution is usually invisible on delivery. It shows up as a hue shift in month three, a prong that will not hold after a resize, or a plating that reads slightly warm under store lighting.

How Certificate-to-stone Is Measured

We measure certificate-to-stone traceability on every lot and record the number against the rack. It is the one figure a buyer can independently verify with a caliper, a loupe and ten minutes at the receiving table.

If the number is inside the band, the lot ships. If it is outside, it goes back to the bench rather than into a carton with a note that says the buyer should expect variation.

What One Returned Lab grown diamond Actually Costs

A returned lab grown diamond costs the unit price twice: once in goods, once in handling, plus the freight both ways and the customer's lost confidence. On a lab grown diamond the handling is usually larger than the margin.

That is the arithmetic behind every decision on this page. A cent saved on plating is not a saving if it produces a return rate two points higher.

Sampling Plan and the AQL We Work To

We inspect at AQL 2.5 on the final line and 3 to 5 per cent on setting, sampled per carton rather than per lot. Per-carton sampling is stricter because a defect that clusters in one carton is a process problem, not a random one.

Anything above the AQL is held and reworked before packing. We do not sort after arrival, because sorting after arrival is a cost the buyer pays and a defect the buyer discovers in front of a customer.

Where the Margin Leaks After the Order Lands

The unit price is the visible cost. The invisible ones are returns, size exchanges, replating, markdowns and the labour of photographing a piece that arrived with the wrong tone.

On a typical wholesale programme those five add between eight and fourteen per cent to the real cost of goods. Fixing plating thickness and stone hue band removes most of it before the first season ends.

The Difference Between Capacity and Availability

Capacity is how much a line can make in a month. Availability is how much of that is free in the week you need it. Factories quote the first and deliver the second.

We quote capacity per line and then reserve a slot against your deposit, so the date you are given is a booked date rather than an average.

How We Test Before the Carton Closes

Testing happens at four points and none of them is the packing table. The casting tree is checked for porosity and short fill, the setting bench for seat and tilt, the plating rack for thickness on a cross-section, and the final line for weight and dimension.

A final inspection alone catches perhaps a third of what goes wrong, because the other two thirds were decided upstream. That is why the record has four columns and not one.

Where the Margin Leaks After the Order Lands

The unit price is the visible cost. The invisible ones are returns, size exchanges, replating, markdowns and the labour of photographing a piece that arrived with the wrong tone.

On a typical wholesale programme those five add between eight and fourteen per cent to the real cost of goods. Fixing plating thickness and stone hue band removes most of it before the first season ends.

What It Costs and How Long It Takes

Fifty pieces per design is the working minimum on diamonds & 4cs. A sample runs three to five days, bulk fifteen to twenty days under 500 pieces, and a custom mould twenty-five to thirty days from drawing approval. Payment is 30% deposit with the balance against the bill of lading copy.

If the order is below fifty, the setup cost per piece roughly doubles because the casting tree and the plating rack are fixed costs. That is arithmetic, not a policy to negotiate around.

ItemValueNote
MOQ50 pcs / designsizes and colours can be split
Sample3-5 daysone piece, approved before the run
Bulk lead time15-20 daysunder 500 pieces
Custom lead time25-30 daysfrom drawing approval
Payment30% / 70%balance against B/L copy
PortGuangzhou / Shenzhenexport from Wuzhou

Frequently Asked Questions

What is the minimum order for diamonds & 4cs?

Fifty pieces per design, and you can split that across three ring sizes or two plating colours without a surcharge. Below fifty, the setup cost per piece roughly doubles because the casting tree and the plating rack are fixed costs.

Do prices change between orders?

Metal moves, so we quote a base plus a metal adjustment clause reviewed quarterly. Your unit price stays flat inside the quarter, and the clause is one line you can audit against the London fix rather than a vague surcharge.

Can you match a competitor's price?

Usually we can show why their price is lower. It is normally thinner plating, a lower stone grade, or a stock photo instead of a production sample. We will quote the same specification and let you compare like for like.

What payment terms apply?

Thirty per cent deposit with the balance against the bill of lading copy. For repeat buyers past three clean orders we move to thirty days after shipment on approval.

Can you produce a second lot identical to the first?

Yes, if we hold the four inputs: alloy batch, stone parcel, plating tank and setting team. The reorder sheet records all four, so the check happens against a document rather than against a memory.

What happens if the lot arrives outside the agreed tolerance?

Photograph the piece with a scale and reference the lot line. Above the agreed AQL we replace and cover freight; inside it we replace the affected units inside ten days.

About the Manufacturer

HOLYCOME by Wuzhou HengliLai Jewelry Co., Ltd. runs casting, setting, polishing and plating on one site in Wuzhou, Guangxi, the artificial gemstone cluster that supplies most of the trade. Monthly capacity is roughly 60,000 pieces across silver and gold lines. Buyers can reach the trade desk at service@holycome.com or on WhatsApp at +86 18078079070, and a factory visit can be arranged with two weeks' notice.

Next Step

If you are pricing diamonds & 4cs for a season, send the quantity per design, the stone grade you need and the date you need it on the shelf. We will return a drawing, a landed cost and a production date within three days, and a physical sample before you commit to a run. Samples are charged at cost and credited against the first order.

Related reading: CVD vs HPHT Lab Diamonds in Bulk Inventory - HOLYCOME, Reading a Lab-Grown Diamond Parcel Report - HOLYCOME, B2B Jewelry Payment Terms: Deposit and Risk - HOLYCOME