A retailer in Oslo asked for exclusive designs and received a recoloured version of a stock style and found it on a marketplace within a month. The order was not lost on price. It was lost on a specification nobody wrote down. This piece looks at wedding rings from the buyer's side of the table: what the promise means at the bench, what it costs to get it wrong, and how to write a brief a factory can be held to.
What Private Label Really Requires Beyond a Logo on the Box
Private label is not a box and a tag. It is an exclusivity term, a design source, a packaging specification and a reorder guarantee, and all four have to be in writing.
We will not sell a design we made for you to another buyer. That is a contractual commitment, not a courtesy.
What the Industry Standard Delivers, and Where It Breaks
The default offer in this category is a stock photo, a unit price and a thirty-day promise. That works for one order and stops working on the second, because a stock photo cannot specify court.
| Comparison | Common practice | What we hold | Why it matters |
|---|---|---|---|
| Element | Weak programme | What we contract | |
| Design | recoloured stock | new mould or documented variant | |
| Exclusivity | none | no resale of the design for 24 months | |
| Packaging | generic box | your dieline and barcode | |
| Reorder | price at will | price band locked 12 months |
How We Set Up a White-Label Programme That Holds Its Margin
Width and diameter consistency across a 200-piece run is the number we publish per lot. It is the one a buyer can check with a caliper and a loupe in ten minutes, and the one that decides whether a reorder is a formality or a negotiation.
- Lot and rack reference on every carton
- Court declared on the invoice, not assumed
- One plated sample approved per rack before the run
- Stone parcel photographed and hue band stated in writing
What One Returned Band Actually Costs
A returned band costs the unit price twice: once in goods, once in handling, plus the freight both ways and the customer's lost confidence. On a band the handling is usually larger than the margin.
That is the arithmetic behind every decision on this page. A cent saved on plating is not a saving if it produces a return rate two points higher.
Sampling Plan and the AQL We Work To
We inspect at AQL 2.5 on the final line and 3 to 5 per cent on setting, sampled per carton rather than per lot. Per-carton sampling is stricter because a defect that clusters in one carton is a process problem, not a random one.
Anything above the AQL is held and reworked before packing. We do not sort after arrival, because sorting after arrival is a cost the buyer pays and a defect the buyer discovers in front of a customer.
What the Buyer Can Verify in Ten Minutes
At the receiving table: count per SKU against the packing list, weigh three pieces, measure the band, check one stone at 10x for seat and tilt, and confirm the plating colour against an approved sample.
Five checks, ten minutes. They catch the defects that are visible on day one and free the buyer to argue about the ones that are not, with evidence rather than impression.
Specification, Field by Field
Read the specification as a checklist: court, flat and comfort-fit profiles from 2.0mm to 8.0mm width, inside diameter tolerance +/-0.15mm. Each comma is a decision someone made, and each decision has a cheaper alternative that a factory can substitute without telling you.
The substitution is usually invisible on delivery. It shows up as a hue shift in month three, a prong that will not hold after a resize, or a plating that reads slightly warm under store lighting.
How Width Is Measured
We measure width and diameter consistency across a 200-piece run on every lot and record the number against the rack. It is the one figure a buyer can independently verify with a caliper, a loupe and ten minutes at the receiving table.
If the number is inside the band, the lot ships. If it is outside, it goes back to the bench rather than into a carton with a note that says the buyer should expect variation.
What One Returned Band Actually Costs
A returned band costs the unit price twice: once in goods, once in handling, plus the freight both ways and the customer's lost confidence. On a band the handling is usually larger than the margin.
That is the arithmetic behind every decision on this page. A cent saved on plating is not a saving if it produces a return rate two points higher.
The Paperwork That Travels With the Carton
A commercial invoice, a packing list and a certificate of origin, and the three have to agree line for line. Customs does not fail on the goods, it fails on the description, and a finished piece declared under a loose-stone heading is the most common failure in this trade.
We issue the set with the finished-article classification and the composition on the invoice, and we quote freight on both actual and volumetric weight so the landed number you model is the one you pay.
How a Fifty-Piece Trial Is Run
A trial is not a small version of an order. It is a test of four things: whether the drawing survives production, whether the hue band lands where you approved it, whether the plating thickness holds, and whether the carton arrives saleable.
We run it as a normal lot, not a special one, because a trial produced on a different line tells you nothing about the line you will eventually buy from.
How the Specification Reads at the Bench
A specification is only useful if a bench worker can act on it. "Premium quality" cannot be acted on. "Four-prong basket, 1.2mm prong wire, stone seated within 0.02mm of the bearing surface" can be checked with a loupe in nine seconds.
We write at that level because that is the level where a defect is preventable. Every field on our sheet has an instrument behind it: a caliper, a loupe, a cross-section, a salt-spray chamber.
The Paperwork That Travels With the Carton
A commercial invoice, a packing list and a certificate of origin, and the three have to agree line for line. Customs does not fail on the goods, it fails on the description, and a finished piece declared under a loose-stone heading is the most common failure in this trade.
We issue the set with the finished-article classification and the composition on the invoice, and we quote freight on both actual and volumetric weight so the landed number you model is the one you pay.
What It Costs and How Long It Takes
Fifty pieces per design is the working minimum on wedding rings. A sample runs three to five days, bulk fifteen to twenty days under 500 pieces, and a custom mould twenty-five to thirty days from drawing approval. Payment is 30% deposit with the balance against the bill of lading copy.
If the order is below fifty, the setup cost per piece roughly doubles because the casting tree and the plating rack are fixed costs. That is arithmetic, not a policy to negotiate around.
| Item | Value | Note |
|---|---|---|
| MOQ | 50 pcs / design | sizes and colours can be split |
| Sample | 3-5 days | one piece, approved before the run |
| Bulk lead time | 15-20 days | under 500 pieces |
| Custom lead time | 25-30 days | from drawing approval |
| Payment | 30% / 70% | balance against B/L copy |
| Port | Guangzhou / Shenzhen | export from Wuzhou |
Frequently Asked Questions
Can you make an exclusive design for us?
Yes, with a new mould paid once and owned by you. We will not offer that design, or a variant within 1mm of its outline, to another buyer for twenty-four months.
What is the minimum for private label?
Fifty pieces per design, with a minimum of four designs to justify a dedicated packaging run. Below four designs the dieline cost per SKU dominates.
Do you handle the labelling?
Yes, including the country-of-origin mark, the karat hallmark and your SKU barcode. We will produce one labelled sample for legal review before the run.
Who is the manufacturer of record?
We are, and we will say so on the customs paperwork. Some brands prefer to be named as the importer of record, which is a separate arrangement we can document.
Can you produce a second lot identical to the first?
Yes, if we hold the four inputs: alloy batch, stone parcel, plating tank and setting team. The reorder sheet records all four, so the check happens against a document rather than against a memory.
What happens if the lot arrives outside the agreed tolerance?
Photograph the piece with a scale and reference the lot line. Above the agreed AQL we replace and cover freight; inside it we replace the affected units inside ten days.
About the Manufacturer
HOLYCOME by Wuzhou HengliLai Jewelry Co., Ltd. runs casting, setting, polishing and plating on one site in Wuzhou, Guangxi, the artificial gemstone cluster that supplies most of the trade. Monthly capacity is roughly 60,000 pieces across silver and gold lines. Buyers can reach the trade desk at service@holycome.com or on WhatsApp at +86 18078079070, and a factory visit can be arranged with two weeks' notice.
Next Step
If you are pricing wedding rings for a season, send the quantity per design, the stone grade you need and the date you need it on the shelf. We will return a drawing, a landed cost and a production date within three days, and a physical sample before you commit to a run. Samples are charged at cost and credited against the first order.
Related reading: Moissanite Colour Treatment Disclosure Guide - HOLYCOME, GRA vs IGI Moissanite Report: What It Verifies - HOLYCOME, Moissanite Cutting Yield: Why Carat Quotes Move - HOLYCOME