The single question I get about moissanite is not 'does it look like a diamond?' — it is 'will it still look like that in ten years?' Fair question. A solitaire is worn while washing up, lifting shopping, typing, gardening and occasionally banged against a desk. The stone has to survive all of that. Here is how moissanite actually performs, stripped of the marketing language.
The hardness numbers
Hardness on the Mohs scale measures resistance to scratching, not to breaking. Diamond tops the scale at 10. Moissanite sits at 9.25, sapphire at 9, ruby the same, and cubic zirconia at 8–8.5. In practice, the only common material that will scratch moissanite is another diamond. Sand, dust and most kitchen surfaces are below it, so your ring will not develop the fine surface haze that builds up on softer stones like aquamarine or pearl.
Where moissanite can still be damaged
Hardness and toughness are different things. Moissanite is brittle along its crystalline structure, and a sharp, direct knock on a corner — especially on a thin girdle — can chip it, in the same way a sapphire or emerald can. The risk is low in a well-made bezel or four-claw setting, but real. The trade-off in plain terms:
| Scenario | Diamond | Moissanite | Notes |
|---|---|---|---|
| Daily wear, hand washing | Excellent | Excellent | No difference to you |
| Lotions, hand cream, soap | Fine | Fine | Build-up, not damage |
| Knock on a hard corner | Very rarely chips | Can chip on a sharp blow | Setting matters |
| Ultrasonic cleaner | Safe, usually | Use with caution | Heat and vibration can loosen setting |
| Chlorine / hot tub | Fine | Fine for the stone; bad for the metal | Remove for the metal's sake |
The clouding question
Older moissanite — particularly the first-generation stones sold in the 2000s — was criticised for looking grey or cloudy under some light. Modern moissanite (post-2016, the better-known US and UK lines) is much closer to colourless and stable. If a seller is offering a suspiciously cheap moissanite, ask which generation it is and look at it in daylight before you buy. Cheap imports from unknown factories are where the bad reputation comes from.
What to do to keep it looking new
- Wash the ring once a fortnight in warm water with a drop of washing-up liquid, using a soft toothbrush to get under the claws.
- Avoid tumbling it with other jewellery; store it separately so it does not rub against diamonds.
- Have the claws checked and tightened every 18 months — a loose claw loses stones, whatever the stone is.
- If you use an ultrasonic cleaner at a jeweller's, tell them it is moissanite; most will use the steam or manual method instead.
- Take the ring off for heavy gardening, weightlifting or construction work. This applies to diamonds too.
What changes after five years of wear
Owners of modern moissanite rarely report the stone itself dulling. What does happen is the setting: claws loosen, rhodium plating on a white gold band fades, and tiny scratches build up on the metal around the stone. Every one of those is a maintenance issue, not a failure of the moissanite. A stone that was bought with a platinum or 18ct gold setting and a reputable claw design will, after five years, look almost the same as day one; a stone set in a thin 9ct band on a tight budget will look tired for entirely avoidable reasons. Spend on the setting, and the stone looks after itself.
Heat, sunlight and temperature
Moissanite is stable at ordinary temperatures — sitting on a sunny windowsill, a hot summer day, even the warmth of a pocket changes nothing. What it does not like is sudden, extreme heat: a jeweller's torch during a setting repair, or a ring left on a radiator. Good workshops know to set moissanite at lower temperatures, and most will remove the stone and re-set it rather than risk thermal shock. If you ever have the ring repaired, tell the bench jeweller the stone is moissanite before they light the torch; it is a thirty-second warning that prevents a cracked pavilion.
Colour grades on moissanite
Moissanite is graded by its own colour system, often described as 'colourless' (DEF equivalent) or 'near-colourless' (GHI equivalent). The better UK lines sell colourless stones, which read white in a platinum or white gold setting. Cheaper imports can carry a faint green or grey tint that only shows under strong daylight — the reason to buy from a named UK supplier rather than a no-name marketplace listing. If a price for a 2ct-looking moissanite solitaire is under £400 all-in, the stone is likely the tinted kind, and you should ask for a daylight photo before committing.
Colourless moissanite on a white band will read bright and clean for years; near-colourless on a yellow gold band is indistinguishable to most people. Ask the supplier which grade they stock before you set your heart on a look.
For the bigger picture on how moissanite compares on cost and appearance, see our moissanite versus diamond comparison.
The Wikipedia article on rhodium explains why rhodium plating is applied to white gold and silver jewellery.
Related Reading
- What Is Moissanite Complete Guide to Quality - HOLYCOME
- Moissanite Hardness Durability and Care Guide - HOLYCOME
- What Is Moissanite Complete Guide to Properties Value and Care - HOLYCOME
Frequently Asked Questions
Is moissanite a good diamond alternative for retail buyers?
Yes for price-sensitive customers who want brilliance and hardness. Moissanite ranks 9.25 on the Mohs scale, holds up to daily wear and costs a fraction of a natural diamond of the same size, so it resells fast in bridal and fashion lines.
What is the minimum order for wholesale moissanite?
MOQ starts at 50 pieces per design for stock items. Custom cuts and private-label settings usually start at 100–300 pieces depending on the mold.
Do you provide certificates with moissanite stones?
Yes. Every parcel ships with GRA or IGI documentation listing carat weight, color grade and cut. We recommend passing the certificate to your end customer for trust.
How long does sample and bulk production take?
Samples ship in 3–5 days. Bulk runs take 15–20 days under 500 pieces, and 25–30 days for custom work.