Not every diamond on the market is in its natural, untreated state. Most are, but a meaningful share have been treated to improve their apparent clarity. The two big treatments buyers encounter are fracture filling and laser drilling. They work in opposite ways, and you should know which one you are looking at. This article covers laser drilling.
The problem: black carbon inclusions
Diamonds form deep in the earth and often trap tiny crystals or pockets of graphite (black carbon) inside them. When one of those dark spots sits where you can see it through the crown, it drags the clarity grade down and, more importantly, hurts the diamond's face-up appearance. A VS2 with a single black crystal in the center may look worse than a clean SI1 off to the side.
How laser drilling works
Laser drilling targets exactly those dark inclusions. The jeweler uses a focused laser to burn an extremely narrow tunnel—a fraction of a human hair's width—from the surface of the diamond down to the inclusion. The laser vaporizes part of the dark crystal. Then acid is flushed through the tunnel to dissolve the remaining dark material and lighten the spot until it is no longer obvious to the naked eye.
Two important facts follow. First, the tunnel is real: it is a permanent, microscopic hole that connects the inclusion to the surface. Second, the diamond itself is still 100% natural and still a genuine diamond—only the visibility of the inclusion has been reduced. The treatment does not change the diamond's hardness or identity.
How it differs from fracture filling
Buyers often mix these up. Fracture filling injects a glass-like material into feathers (cracks) to make them less visible. That filler can be damaged by heat, ultrasound, or repair work, and it must be disclosed. Laser drilling does not add anything; it removes or lightens a dark inclusion and leaves a tunnel. It is considered the more stable of the two treatments.
Is it safe and durable?
Laser drilling is permanent under normal wear. You can clean the ring, wear it daily, and have it resized—the tunnel and the lightened inclusion stay put. The one caveat is heat. Because the tunnel reaches the surface, extreme heat (such as a jeweler's torch during prong repair or re-tipping) can sometimes cause a dark spot to reappear or the treated area to react. Always tell your jeweler if a stone is laser drilled before any heating work. Durability-wise, the diamond remains a 10 on the Mohs scale, so the treatment itself does not make it more chip-prone.
Price and resale
A laser-drilled diamond is cheaper than an identical-looking untreated stone—typically discounted because the clarity grade on the report reflects the pre-treatment or treated state and the market prices treated goods lower. That is fine if you understand what you bought. The catch comes at resale: treated diamonds resell for substantially less than untreated ones, and some buyers (and some insurers) will not touch them. Our look at diamond inclusions helps you judge whether a stone's flaws are the kind that get treated.
How to know
Labs disclose it. A GIA or IGI report on a laser-drilled diamond will state it clearly, often with a remark like "laser drilling" or "laser drilled to improve clarity." If a seller cannot show you a certificate that mentions the treatment, treat that as a warning sign. Buying untreated is always the lower-risk path for investment-minded buyers, but a transparently disclosed, fairly priced laser-drilled stone can be a sensible choice for someone who wants a larger, cleaner-looking face on a budget.
How much cheaper should it be?
There is no fixed discount, but treated stones consistently sell well below the price of equivalent untreated goods. The market knows the tunnel is permanent and that resale is weaker, so it prices the stone accordingly. If a laser-drilled stone is being sold to you at nearly the same price as an untreated one, you are not getting the deal the treatment implies. Ask the seller to show you the pre-treatment clarity versus the post-treatment clarity on the certificate, and compare that against the price gap to an untreated stone of similar face-up appearance.
Care and repair warnings
Because the tunnel reaches the surface, there are a few things to avoid. Do not put a laser-drilled diamond in an ultrasonic cleaner if the jeweller has advised against it, and never let a bench jeweler heat the stone without first telling them it is treated—a torch used to re-tip a prong can travel heat into the tunnel and darken the inclusion again. For everyday wear, a gentle warm-soap clean and occasional professional steam is enough. When you insure the ring, declare the treatment on the policy; an undisclosed treated stone can complicate a claim if the ring is lost or damaged. Our jewellery insurance guide explains what to declare and how valuations work.
Gemstone grading terminology used here follows the Gemological Institute of America’s gem encyclopedia.
Related Reading
- I1, I2, I3 Clarity: What Included Diamonds Actually Mean
- Diamond Table and Depth Percentages: What the Numbers Actually Mean
- VS1 vs VS2 Diamond Clarity: Which Grade to Buy
Frequently Asked Questions
Is moissanite a good diamond alternative for retail buyers?
Yes for price-sensitive customers who want brilliance and hardness. Moissanite ranks 9.25 on the Mohs scale, holds up to daily wear and costs a fraction of a natural diamond of the same size, so it resells fast in bridal and fashion lines.
What is the minimum order for wholesale moissanite?
MOQ starts at 50 pieces per design for stock items. Custom cuts and private-label settings usually start at 100–300 pieces depending on the mold.
Do you provide certificates with moissanite stones?
Yes. Every parcel ships with GRA or IGI documentation listing carat weight, color grade and cut. We recommend passing the certificate to your end customer for trust.
How long does sample and bulk production take?
Samples ship in 3–5 days. Bulk runs take 15–20 days under 500 pieces, and 25–30 days for custom work.