Vermeil and Gold Plating Specs for diamonds and 4Cs
Vermeil means a gold layer of at least 2.5 microns over sterling silver, and the US market reads that number as a material claim rather than a finish note. Below 2.5 microns the piece is gold-plated, not vermeil, and the word cannot be used, and at USD 192-1568 for 100 pieces that is the number the buyer signs.
We run 3 microns on diamonds and 4Cs for accounts that publish the claim, with a palladium strike layer so wear-through reads white and not yellow. Thickness is logged per lot and appears on the GRA report batch sheet, which is how the Vermeil Upgrade account reads it at USD 192-1568.
The cost difference is real: the USD 192-1568 band moves up roughly sixty percent against rhodium-finished silver, and the retail price has to carry that or the margin disappears in the second season when the plating shows wear.
MOQ, Mixed Designs and the Real First Order
The brief was simple: 100 diamonds and 4Cs, 14K/18K gold or platinum with IGI-certified lab-grown diamond, delivered before September. The run that arrived carried 17 pieces with certificate mismatch, and the buyer spent USD 60-360 on sorting before the goods reached a shelf, with GRA report and retail box with care card stated on the same sheet.
Nobody on that bench was careless. They were working to a spec that existed only in a photograph, and certificate mismatch is what a photograph fails to define, on a 100-piece Vermeil Upgrade order at USD 192-1568.
The fix cost about 26 seconds per diamonds and 4C and removed the credit note entirely. That is the whole economics of a spec sheet, and it is why we write one on every quote, with GRA report and retail box with care card stated on the same sheet, priced at USD 192-1568 for the 100-piece Vermeil Upgrade run.
The Three Failures We See Most in Incoming Samples
certificate mismatch
A stone whose report says VS1 but whose plot shows a cloud near the table reads as a grade dispute at the counter. Match the plot, not only the grade line, which is USD 192-1568 on the Vermeil Upgrade schedule.
Our countermeasure is a gauge and a written limit. It adds about 26 seconds per piece and removes the defect from the run rather than from the carton, which the Vermeil Upgrade file records at USD 192-1568 in retail box with care card.
growth-method disclosure
CVD and HPHT stones behave differently under high heat during setting. Disclosing the method protects both sides in a repair claim, which is how the Vermeil Upgrade account reads it at USD 192-1568.
In a 100-piece run this typically shows on 14 of pieces. Catching it means measuring report plot match at the tray level, not inspecting the finished carton, shipped as retail box with care card and certified GRA report.
table percentage variance
A 62% table in a bright cut reads dark in a store window. Buying by table percentage, not only by carat, keeps the display consistent, the figure being USD 192-1568 for a 100-piece run.
The commercial effect is stone replacement at a four-figure cost, plus a disclosure review. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, the figure being USD 192-1568 for a 100-piece run.
Where USD 192-1568 Per Piece Actually Goes
Cost per piece at USD 192-1568 leaves little room for assumption. The table shows which line compresses and which one only moves quality.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for diamonds and 4Cs | 30% | Alloy choice and casting yield |
| Stone or melee for diamonds and 4Cs | 20% | Sieve range and lot batching |
| Setting and finishing labor for diamonds and 4Cs | 19% | Jig design and bench minutes |
| Plating, polish and QC for diamonds and 4Cs | 12% | Per-tray versus per-piece checks |
| Packaging for diamonds and 4Cs | 19% | retail box with care card |
A factory with no bench minutes per piece has never costed diamonds and 4Cs at USD 192-1568. Ask for minutes and for the reject rule.
What US buyers Check Before They Sign
Four lines decide whether diamonds and 4Cs at USD 192-1568 sells through or comes back, and none of them appears on a typical trading-company quote.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Plating thickness | Nominal only | 0.20 micron rhodium logged per lot, 3 microns on vermeil | Wear-through inside one season |
| Surface porosity after polish | Seen after plating | Cast porosity checked before plating, rejects pulled at that stage | Plating blister six weeks later |
| Stone colour consistency | Graded by eye under D65 | Colour matched to a retained master stone, per tray | Repeat colour complaint in the same SKU |
| Sizing drift across the run | Not measured | Go/no-go gauge on every size, drift held under 0.15 mm | Resize queue and reship cost |
Put these four into the purchase order and the Vermeil Upgrade argument after delivery becomes arithmetic, the figure being USD 192-1568 for a 100-piece run.
Order Terms, Sample Timing and Packing
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 100-piece Vermeil Upgrade order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, quoted at USD 192-1568 per piece in retail box with care card.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 192-1568 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the retail box with care card format at 100 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, quoted at USD 192-1568 per piece in retail box with care card.
Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of report plot match for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, which is how the Vermeil Upgrade account reads it at USD 192-1568.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, and at USD 192-1568 for 100 pieces that is the number the buyer signs.
AQL, Tray Checks and What a QC Report Should Say
The number is less interesting than the rule behind it, and diamonds and 4Cs is where that rule gets tested, certified GRA report and packed retail box with care card at 100 pieces.
We run this check per tray rather than per carton because the defect that matters on diamonds and 4Cs is the one that repeats. A single odd piece is noise; a pattern across one tray is a process problem and it will be in every tray made after it, and 100 pieces leaves Wuzhou in retail box with care card at USD 192-1568.
The report the buyer receives states the count per tray, the measured average and the outlier count for diamonds and 4Cs. It is deliberately unglamorous, and it is the document that settles most disputes before they start, and 100 pieces leaves Wuzhou in retail box with care card at USD 192-1568.
Carton Cube, Duty and the Freight Line That Surprises Buyers
Ask three suppliers of diamonds and 4Cs this question and you will get three answers. Only one of them survives an inspection, the figure being USD 192-1568 for a 100-piece run.
The buyers who get the most out of diamonds and 4Cs treat the first order as a measurement, not as a purchase. They buy a small run, measure the four numbers that matter, and then commit, and at USD 192-1568 for 100 pieces that is the number the buyer signs.
We support it directly on diamonds and 4Cs: a 50-piece test run per design, the same gauge standard as a bulk order, and the same retained tray. Small does not have to mean loose, and at USD 192-1568 for 100 pieces that is the number the buyer signs.
Freight, Duty and the Arrival Check
Export runs through Guangzhou or Shenzhen. Air freight lands in 5-8 days on the US west coast and 7-10 on the east, certified GRA report and packed retail box with care card at 100 pieces, and the Vermeil Upgrade quote for it sits at USD 192-1568.
For a first order, DDP matters more than the freight rate. The surprise is the duty line, not the per-kilo charge, the figure being USD 192-1568 for a 100-piece run.
Check the count, the weight and report plot match and table percentage within the stated band before the carton goes to the shelf. Twenty minutes at receiving saves a season of returns, shipped as retail box with care card and certified GRA report, which is how the Vermeil Upgrade account reads it at USD 192-1568.
How a Repeat Order Gets Built
The sequence below is fixed for a Vermeil Upgrade run. The dates move with the stone lot, not with the shipping season, and 100 pieces leaves Wuzhou in retail box with care card at USD 192-1568.
- Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
- Cut the model in wax or resin and photograph it on the gauge before metal is committed.
- Cast the first article, set the stones and finish it exactly as bulk will be finished.
- Send the first article for approval with the weight and the stone measurements stated.
- Run the balance of the order in 25-30 days, holding the approved article as the reference.
- Ship with the approved article photographed beside a production piece from the same tray.
Reorders inside this sequence run 12-15 days, because the model and the gauge set stay here after the Vermeil Upgrade shipment, certified GRA report and packed retail box with care card at 100 pieces.
What This Means for a First Order
A first Vermeil Upgrade order of 50 pieces per design at USD 192-1568 is a test of the line, not a commitment to the range.
Ask for the retained tray and the batch report with the first shipment. Both are free and both decide the second order, which is USD 192-1568 on the Vermeil Upgrade schedule.
Frequently Asked Questions
How long does a reorder of the same diamonds and 4C take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, shipped as retail box with care card and certified GRA report.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white diamonds and 4Cs, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which the Vermeil Upgrade file records at USD 192-1568 in retail box with care card.
How is diamonds and 4Cs packed for retail box with care card?
Every unit goes into a foam-backed pouch, then the retail box with care card, then the outer carton at 100 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, the figure being USD 192-1568 for a 100-piece run.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, with GRA report and retail box with care card stated on the same sheet.
How long does a reorder of the same diamonds and 4C take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, shipped as retail box with care card and certified GRA report.
Next Step
The next step is a sample in 3-5 days, not a container. Write to service@holycome.com or WhatsApp +86 18078079070 and mark it Vermeil Upgrade, on a 100-piece Vermeil Upgrade order at USD 192-1568.
HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, priced at USD 192-1568 for the 100-piece Vermeil Upgrade run.
Related reading: Diamonds & 4Cs Amazon FBA Ready: Sample to Container: The Real Calendar - HOLYCOME Moissanite Made to Order: The Reject Tray Policy That Decides a Partnership - HOLYCOME