Sample to Container: The Real Calendar

Last February, a US buyer of diamonds and 4Cs placed 200 diamonds and 4Cs against a sample signed in June. The first container landed with 9 pieces that failed on certificate mismatch alone, and USD 50-240 landed on the buyer's P&L before a single unit sold, the figure being USD 120-980 for a 200-piece run.

On a 200-piece order at USD 120-980, a certificate mismatch rate above two percent is not a quality surprise. It is a costing error that shows up as a credit note three weeks later.

Diamonds & 4Cs wholesale piece from the HOLYCOME line in Wuzhou

Nothing in the rebuild was expensive. A gauge, a written limit and a retained tray did the work that a discount would only have delayed, priced at USD 120-980 for the 200-piece Amazon FBA Ready run.

What US buyers Check Before They Sign

At USD 120-980 per piece the four measurements below are worth more than the discount being negotiated. One of them costs nothing to write down.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Stone colour consistencyGraded by eye under D65Colour matched to a retained master stone, per trayRepeat colour complaint in the same SKU
Sizing drift across the runNot measuredGo/no-go gauge on every size, drift held under 0.15 mmResize queue and reship cost
Clasp spring lifeSampled by handCycled 500 times on a jig per lotDetach claim and brand damage
Prong tension and seat depthChecked by feel at the benchPull-tested per piece, seat depth written on the sheetStone loss and total replacement

Write these into the Amazon FBA Ready purchase order and the arrival check becomes arithmetic instead of recollection, the figure being USD 120-980 for a 200-piece run.

Where USD 120-980 Per Piece Actually Goes

Cost at USD 120-980 leaves no room for assumption. The table shows which line compresses and which line only moves quality down.

Diamonds & 4Cs setting and finish detail on a HOLYCOME factory sample
Cost lineShareWhat moves it
Base metal or alloy for diamonds and 4Cs30%Alloy choice and casting yield
Stone or melee for diamonds and 4Cs20%Sieve range and lot batching
Setting and finishing labor for diamonds and 4Cs19%Jig design and bench minutes
Plating, polish and QC for diamonds and 4Cs12%Per-tray versus per-piece checks
Packaging for diamonds and 4Cs19%retail-ready box with FNSKU label

A factory that cannot state its bench minutes per piece has never costed its own line. Ask for minutes and for the reject rule, not for a discount, which the Amazon FBA Ready file records at USD 120-980 in retail-ready box with FNSKU label.

The Three Failures We See Most in Incoming Samples

certificate mismatch

A stone whose report says VS1 but whose plot shows a cloud near the table reads as a grade dispute at the counter. Match the plot, not only the grade line, on a 200-piece Amazon FBA Ready order at USD 120-980.

In a 200-piece run this typically shows on 8 of pieces. Catching it means measuring report plot match at the tray level, not inspecting the finished carton, and the Amazon FBA Ready quote for it sits at USD 120-980.

growth-method disclosure

CVD and HPHT stones behave differently under high heat during setting. Disclosing the method protects both sides in a repair claim, which the Amazon FBA Ready file records at USD 120-980 in retail-ready box with FNSKU label.

The commercial effect is stone replacement at a four-figure cost, plus a disclosure review. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, shipped as retail-ready box with FNSKU label and certified GRA report.

table percentage variance

A 62% table in a bright cut reads dark in a store window. Buying by table percentage, not only by carat, keeps the display consistent, shipped as retail-ready box with FNSKU label and certified GRA report.

Our countermeasure is a gauge and a written limit. It adds about 26 seconds per piece and removes the defect from the run rather than from the carton, quoted at USD 120-980 per piece in retail-ready box with FNSKU label.

Listing diamonds and 4Cs on Amazon FBA Without a Takedown

Amazon treats jewellery as a category where the packaging is part of the compliance file, not an afterthought. A poly bag with an opening of five inches or more needs the suffocation warning printed on it, and every unit needs an FNSKU label that covers the manufacturer barcode rather than sits beside it, with GRA report and retail-ready box with FNSKU label stated on the same sheet.

For diamonds and 4Cs the practical constraint is that a unit must survive a bin with other units and still read clean at unboxing. We pack each piece in a foam-backed pouch, then the retail box, then the FNSKU on the outside of the pouch, so a warehouse scan never touches the box the customer sees, which is how the Amazon FBA Ready account reads it at USD 120-980.

Weight and dimension limits decide your freight per unit more than the piece cost does. A single diamonds and 4C in its retail box normally lands under eight ounces, which keeps it in the small standard tier. Anything above that moves a tier and eats the margin you built into the USD 120-980 quote.

Order Terms, Sample Timing and Packing

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 200-piece Amazon FBA Ready order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, priced at USD 120-980 for the 200-piece Amazon FBA Ready run.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 120-980 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the retail-ready box with FNSKU label format at 200 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, certified GRA report and packed retail-ready box with FNSKU label at 200 pieces.

Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of report plot match for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, which the Amazon FBA Ready file records at USD 120-980 in retail-ready box with FNSKU label.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, which is USD 120-980 on the Amazon FBA Ready schedule.

Carton Cube, Duty and the Freight Line That Surprises Buyers

Nobody quotes it for diamonds and 4Cs until something goes wrong, which is exactly why it belongs in the first email, and 200 pieces leaves Wuzhou in retail-ready box with FNSKU label at USD 120-980.

At 200 pieces the arithmetic on diamonds and 4Cs changes: the fixed costs spread, the variable costs do not. That is why the second order prices better than the first even when the gold fix has moved up, certified GRA report and packed retail-ready box with FNSKU label at 200 pieces.

We quote both a first-run price and a reorder price for diamonds and 4Cs on the same sheet so the buyer can see where the curve flattens. Most flatten by the third run, and at USD 120-980 for 200 pieces that is the number the buyer signs.

Alloy, Karat and the Cost of a Color Change

It is not a marketing point on diamonds and 4Cs. It is the number that decides whether the second order happens, certified GRA report and packed retail-ready box with FNSKU label at 200 pieces.

Buyers who get this wrong on diamonds and 4Cs usually get it wrong in the first order and correct it in the second. The cost of that correction is rarely the money; it is the four to six weeks of shelf time lost while a replacement run of diamonds and 4Cs is scheduled behind other orders, the figure being USD 120-980 for a 200-piece run.

Our approach is to write the rule into the diamonds and 4Cs spec sheet before casting, then test it on the first tray. A rule that only exists in an email is not a rule, and a rule that is not tested is a hope, certified GRA report and packed retail-ready box with FNSKU label at 200 pieces.

How a Repeat Order Gets Built

Nothing in this sequence is unusual, and that is the point. Each step exists because skipping it produced a specific failure on a previous order, quoted at USD 120-980 per piece in retail-ready box with FNSKU label.

  1. Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
  2. Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
  3. Approve the sample in writing, including the reject rule and the retained reference tray.
  4. Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
  5. Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.

Reorders inside this sequence run 12-15 days because the model, the gauge set and the signed spec stay in our system, certified GRA report and packed retail-ready box with FNSKU label at 200 pieces, the figure being USD 120-980 for a 200-piece run.

What This Means for a First Order

A first Amazon FBA Ready order of 50 pieces per design at USD 120-980 tests the line rather than the range. Three designs covers the shelf.

Ask for the retained tray and the GRA report batch sheet with the first shipment. Both are free and both decide the reorder, on a 200-piece Amazon FBA Ready order at USD 120-980.

Freight, Duty and the Arrival Check

Export runs through Guangzhou or Shenzhen. Air lands in 5-8 days on the US west coast, 7-10 on the east, and sea takes roughly three times the transit, the figure being USD 120-980 for a 200-piece run.

FOB is the default on diamonds and 4Cs and DDP is the option. Buyers new to the US market usually take DDP once, then switch after they see the breakdown, shipped as retail-ready box with FNSKU label and certified GRA report, which the Amazon FBA Ready file records at USD 120-980 in retail-ready box with FNSKU label.

If certificate mismatch appears in the arrival check, the retained tray decides who owns it. Keep the GRA report batch sheet in the same folder as the packing list, priced at USD 120-980 for the 200-piece Amazon FBA Ready run.

Frequently Asked Questions

What is the minimum order for diamonds and 4Cs?

50 pieces per diamonds and 4C. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, and the Amazon FBA Ready quote for it sits at USD 120-980.

Do you supply certificates for diamonds and 4Cs?

GRA report on diamonds and 4Cs above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of report plot match, which is what a counter or a listing actually needs, certified GRA report and packed retail-ready box with FNSKU label at 200 pieces.

How do you handle a rejected tray?

We replace or credit inside the same order cycle. The retained reference tray decides: if certificate mismatch shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, which the Amazon FBA Ready file records at USD 120-980 in retail-ready box with FNSKU label.

What are the payment terms?

30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, with GRA report and retail-ready box with FNSKU label stated on the same sheet.

What is the minimum order for diamonds and 4Cs?

50 pieces per diamonds and 4C. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, and the Amazon FBA Ready quote for it sits at USD 120-980.

Next Step

The next step is a sample in 3-5 days, not a container. Write to service@holycome.com or WhatsApp +86 18078079070, subject Amazon FBA Ready, and 200 pieces leaves Wuzhou in retail-ready box with FNSKU label at USD 120-980.

HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, and the Amazon FBA Ready quote for it sits at USD 120-980.

Related reading: Diamonds & 4Cs Shopify DTC: AQL, Tray Checks and What a QC Report Should Say - HOLYCOME Moissanite Private Label Carton: What the Quote Actually Covers - HOLYCOME