The Reject Tray Policy That Decides a Partnership

Last September, a US buyer of moissanite placed 50 moissanite against a sample signed in February. The first container landed with 9 pieces that failed on double refraction read alone, and USD 20-75 landed on the buyer's P&L before a single unit sold, and at USD 35-237 for 50 pieces that is the number the buyer signs.

Nobody on that bench was careless. They were working to a spec that existed only in a photograph, and double refraction read is what a photograph fails to define, quoted at USD 35-237 per piece in single-piece foam box.

Moissanite wholesale piece from the HOLYCOME line in Wuzhou

The fix cost about 17 seconds per moissanite and removed the credit note entirely. That is the whole economics of a spec sheet, and it is why we write one on every quote, certified IGI report and packed single-piece foam box at 50 pieces, and 50 pieces leaves Wuzhou in single-piece foam box at USD 35-237.

The Made-to-Order Path for moissanite

Made-to-order is a different production line, not a slower version of stock. It starts with a signed drawing, then a wax or resin model, then a casting, then setting, then finish, and each stage can fail on its own, which is USD 35-237 on the Made to Order schedule.

Twenty days is realistic for a new moissanite when the model exists and only the stone changes. A new model adds a day for the CAD, a day for the print, and a day for the buyer to approve the render before metal is committed, shipped as single-piece foam box and certified IGI report.

The risk sits in approval, not in the bench. A buyer who approves a render on a phone screen and rejects the casting has bought a prototype, not a product. We send the render at 1:1 scale with a millimetre grid for that reason, with IGI report and single-piece foam box stated on the same sheet.

Moissanite setting and finish detail on a HOLYCOME factory sample

The Three Failures We See Most in Incoming Samples

color batch drift

Two lots graded near-colorless can sit two shades apart under daylight. Batch the stone buy per order rather than across quarters, and the Made to Order quote for it sits at USD 35-237.

In a 50-piece run this typically shows on 14 of pieces. Catching it means measuring color consistency within one lot at the tray level, not inspecting the finished carton, the figure being USD 35-237 for a 50-piece run.

girdle chipping

Stones set with a tight prong and no seat cut chip at the girdle during setting. The chip appears after shipping, not on the bench, and 50 pieces leaves Wuzhou in single-piece foam box at USD 35-237.

The commercial effect is stone swap and a disclosure issue, typically USD 12-20 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, with IGI report and single-piece foam box stated on the same sheet.

double refraction read

Moissanite shows doubled facet reflections under a loupe. Buyers who compare it to diamond without disclosing this face a return, not a defect, on a 50-piece Made to Order order at USD 35-237.

Our countermeasure is a gauge and a written limit. It adds about 17 seconds per piece and removes the defect from the run rather than from the carton, on a 50-piece Made to Order order at USD 35-237.

What US buyers Check Before They Sign

Four lines decide whether moissanite at USD 35-237 sells through or comes back, and none of them appears on a typical trading-company quote.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Clasp spring lifeSampled by handCycled 500 times on a jig per lotDetach claim and brand damage
Prong tension and seat depthChecked by feel at the benchPull-tested per piece, seat depth written on the sheetStone loss and total replacement
Hallmark depth and placementStamped where it fitsFixed position, depth measured so it never breaks the shankCustoms query and remaking
Solder flow at the jointNot inspectedJoint inspected under 10x before settingCrack at the seam in transit

Put these four into the purchase order and the Made to Order argument after delivery becomes arithmetic, quoted at USD 35-237 per piece in single-piece foam box.

Order Terms, Sample Timing and Packing

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 50-piece Made to Order order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, priced at USD 35-237 for the 50-piece Made to Order run.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 35-237 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the single-piece foam box format at 50 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, and at USD 35-237 for 50 pieces that is the number the buyer signs.

Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of color consistency within one lot for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, shipped as single-piece foam box and certified IGI report.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, which is how the Made to Order account reads it at USD 35-237.

Where USD 35-237 Per Piece Actually Goes

Cost per piece at USD 35-237 leaves little room for assumption. The table shows which line compresses and which one only moves quality.

Cost lineShareWhat moves it
Base metal or alloy for moissanite30%Alloy choice and casting yield
Stone or melee for moissanite20%Sieve range and lot batching
Setting and finishing labor for moissanite19%Jig design and bench minutes
Plating, polish and QC for moissanite12%Per-tray versus per-piece checks
Packaging for moissanite19%single-piece foam box

A factory with no bench minutes per piece has never costed moissanite at USD 35-237. Ask for minutes and for the reject rule.

MOQ, Mixed Designs and the Real First Order

The figure below is what we quote for moissanite, and it is deliberately narrower than the market average, quoted at USD 35-237 per piece in single-piece foam box.

Three numbers decide it for moissanite: the tolerance band, the inspection density and the responsibility clause. Write all three down and the rest of the negotiation is arithmetic. Leave any of them out and it becomes a discussion about intent, which the Made to Order file records at USD 35-237 in single-piece foam box.

We send a one-page sheet with every moissanite quote that states those three, plus the retained-tray rule. Buyers who compare on it usually find that the gap between suppliers is smaller than the gap between the specs they were comparing, certified IGI report and packed single-piece foam box at 50 pieces.

Sample to Container: The Real Calendar

Most moissanite disputes we arbitrate trace back to this line, not to the defect itself, shipped as single-piece foam box and certified IGI report.

There is a version of this that looks cheaper on paper and costs more in practice: quoting the best case on moissanite and letting the buyer discover the spread. It works once. The second order goes to whichever supplier quoted honestly, shipped as single-piece foam box and certified IGI report.

We would rather lose a first order of moissanite on price than explain a defect after it lands. That position is unusual in this category and it is the reason our reorder share is high, priced at USD 35-237 for the 50-piece Made to Order run.

What This Means for a First Order

A first Made to Order order of 50 pieces per design at USD 35-237 is a test of the line, not a commitment to the range.

Ask for the retained tray and the batch report with the first shipment. Both are free and both decide the second order, which the Made to Order file records at USD 35-237 in single-piece foam box.

Freight, Duty and the Arrival Check

Export runs through Guangzhou or Shenzhen. Air freight lands in 5-8 days on the US west coast and 7-10 on the east, priced at USD 35-237 for the 50-piece Made to Order run.

For a first order, DDP matters more than the freight rate. The surprise is the duty line, not the per-kilo charge, and the Made to Order quote for it sits at USD 35-237.

Check the count, the weight and color consistency within one lot and girdle integrity after setting before the carton goes to the shelf. Twenty minutes at receiving saves a season of returns, and 50 pieces leaves Wuzhou in single-piece foam box at USD 35-237.

How a Repeat Order Gets Built

The sequence below is fixed for a Made to Order run. The dates move with the stone lot, not with the shipping season, priced at USD 35-237 for the 50-piece Made to Order run.

  1. Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
  2. Cut the model in wax or resin and photograph it on the gauge before metal is committed.
  3. Cast the first article, set the stones and finish it exactly as bulk will be finished.
  4. Send the first article for approval with the weight and the stone measurements stated.
  5. Run the balance of the order in 25-30 days, holding the approved article as the reference.
  6. Ship with the approved article photographed beside a production piece from the same tray.

Reorders inside this sequence run 12-15 days, because the model and the gauge set stay here after the Made to Order shipment, with IGI report and single-piece foam box stated on the same sheet.

Frequently Asked Questions

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, certified IGI report and packed single-piece foam box at 50 pieces.

How long does a reorder of the same moissanite take?

With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, and 50 pieces leaves Wuzhou in single-piece foam box at USD 35-237.

What finish do you use, and how thick is it?

Rhodium at 0.20 micron minimum on white moissanite, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, the figure being USD 35-237 for a 50-piece run.

How is moissanite packed for single-piece foam box?

Every unit goes into a foam-backed pouch, then the single-piece foam box, then the outer carton at 50 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, which is USD 35-237 on the Made to Order schedule.

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, certified IGI report and packed single-piece foam box at 50 pieces.

Next Step

The next step is a sample in 3-5 days, not a container. Write to service@holycome.com or WhatsApp +86 18078079070 and mark it Made to Order, on a 50-piece Made to Order order at USD 35-237.

HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, the figure being USD 35-237 for a 50-piece run.

Related reading: Moissanite Private Label Carton: What the Quote Actually Covers - HOLYCOME Care & Maintenance Q4 Holiday Stock: The Sample Approval That Survives Production - HOLYCOME