Open a diamond grading report and you will find a small box labelled "Measurements" with numbers like 6.34 - 6.38 x 4.02 mm. Below that sit two percentages: Table and Depth. Buyers obsess over them, yet few can explain what they actually do. This guide walks through both, the ranges graders expect, and why the numbers are clues rather than verdicts.

What is the table percentage?

The table is the large, flat eight-sided facet on the crown of a round brilliant. Table percentage is its width divided by the diamond's average girdle width, expressed as a percentage. A round brilliant usually lands between 53 and 62 percent. Below that, the crown begins to look steep and chunky; above it, the table starts to dominate and the smaller crown facets shrink, which can reduce the "star" effect people like. Fancy shapes live in wider ranges, with ovals and pears often running larger tables.

What is the depth percentage?

Depth percentage measures the total height of the diamond, from the culet tip to the top of the table, divided by its width. A round brilliant in the 59 to 62 percent range is considered ideal by most labs. Under 57 percent the stone looks flat, like a window, and loses some return of light. Over 64 percent the diamond looks "bottom-heavy" from the top, because light leaks out through the pavilion instead of bouncing back.

Why the two numbers work together

A high table can compensate for a slightly deep pavilion, and a low table can offset a shallow crown. This is why two stones with the same carat weight can look completely different even when both numbers look "in range" on paper. It is also why ideal-cut proportion tables on websites only get you so far. GIA cut grades, by contrast, weigh table, depth, crown angle, pavilion angle, girdle, and star and lower girdle facet lengths together.

Typical ranges by shape

  • Round brilliant: table 54 - 60%, depth 59 - 62%
  • Princess: table 65 - 75%, depth 68 - 72% (designed to look deep but bright)
  • Emerald: table 60 - 70%, depth 60 - 65% (step-cut rewards a larger table)
  • Oval / pear / cushion: table 58 - 65%, depth 60 - 63%, with length-to-width ratio mattering as much

What the numbers cannot tell you

A stone can have textbook table and depth percentages and still look dull if the crown and pavilion angles are off, the girdle is too thick, or the finish (polish and symmetry) is sloppy. Conversely, a stone that sits just outside the "ideal" range on paper can look stunning once set. Always view the diamond in person or on video before letting a single number veto it. For more on how the finish grades affect sparkle, read our overview of symmetry and polish grades.

How to use them while shopping

Treat table and depth as filters, not finals. First, narrow candidates to a sensible range. Then compare the surviving stones side by side under identical light. The one that flashes brighter and feels more "alive" on screen is the one worth the conversation. The numbers simply get you to a short list; the eye makes the final call.

What changes when the shape is fancy

Round brilliants have the tightest proportion windows because labs have measured millions of them. Fancy shapes are more forgiving, and a slightly deep emerald or cushion often looks better on the hand than a textbook one. For ovals and pears, watch the length-to-width ratio as closely as the depth; a too-deep oval can develop a dark bowtie across the centre, which no table percentage on paper will warn you about. Always request a video of the stone tilted, not just facing the camera.

A quick home check

If you already own a diamond and want to sanity-check the numbers on its certificate, you can estimate table percentage at home. Hold a millimetre ruler across the widest part of the table facet from the top, then measure the stone's maximum width. Divide one by the other. The result will land within a point or two of the lab figure. It is not a grading exercise, but it is a useful way to confirm you are reading the report correctly before you trust any online advice about proportions.

One final warning: proportion calculators and ideal-ratio charts on retail sites are marketing tools, not grading standards. They will often declare a stone "ideal" that an independent lab would call merely "excellent." Use the charts to narrow candidates, but let the lab report and your own eyes make the final call. The numbers are a starting point, not a verdict, and the stone on your hand is what you actually live with.

Gemstone grading terminology used here follows the Gemological Institute of America’s gem encyclopedia.

Related Reading

Frequently Asked Questions

Is moissanite a good diamond alternative for retail buyers?

Yes for price-sensitive customers who want brilliance and hardness. Moissanite ranks 9.25 on the Mohs scale, holds up to daily wear and costs a fraction of a natural diamond of the same size, so it resells fast in bridal and fashion lines.

What is the minimum order for wholesale moissanite?

MOQ starts at 50 pieces per design for stock items. Custom cuts and private-label settings usually start at 100–300 pieces depending on the mold.

Do you provide certificates with moissanite stones?

Yes. Every parcel ships with GRA or IGI documentation listing carat weight, color grade and cut. We recommend passing the certificate to your end customer for trust.

How long does sample and bulk production take?

Samples ship in 3–5 days. Bulk runs take 15–20 days under 500 pieces, and 25–30 days for custom work.