Two Buying Guides pieces at very different prices are usually separated by six variables, not by brand. Knowing their weight lets you move a price point without breaking the product.

Variables one and two: metal weight and purity

Metal is the largest line on most Buying Guides quotes. A 1.6 mm band and a 2.2 mm band differ in weight by around 40 percent, and purity multiplies that again.

If a price has to come down, weight is the honest lever; a lighter band can be a legitimate tier. Reducing plating is not.

Put the forecast window in writing. Capacity priority follows predictability, not friendship.

Variables three and four: stone and setting

Stone grade and setting labour move together. A certified stone adds a report cost; a bezel setting adds bench time but removes prong maintenance.

On Buying Guides, the stone is usually the second-largest line and the easiest to over-specify.

VariableShare of costLeverRisk
Metal weight30-45%Band thicknessPerceived quality
PurityMultiplierKaratPrice band
Stone15-35%Grade, sizeLook
Setting10-20%StyleMaintenance
Plating5-10%MicronsReturns
Volume6-16%TierCommitment

Read the table as a checklist rather than a recommendation. The right row depends on the price band, the wear pattern and the channel you sell into.

Seal the approved sample in a bag with the PO number. It is the only physical record that settles a claim without an argument.

Variables five and six: finishing and volume

Plating thickness and the volume tier decide the last 15 to 25 percent. A thicker plate costs more per piece and less per claim.

Volume discounts are real only when they map to a cost driver: alloy purchase, plating batch, bench learning, freight consolidation.

Moving a price point without breaking it

Change one variable at a time and re-check the spec. A price cut that changes two variables at once produces a product nobody can describe.

On Buying Guides, the cleanest lever is weight, then stone size, then plating, in that order.

Most claim conversations end when the measurement is sent. Calipers and a 0.01 g scale settle in one email what adjectives settle in five.

What to check before the order

Run the five checks below in order. The first two protect the money, the last three protect the launch date.

  • Know the share of each variable.
  • Change one variable at a time.
  • Use weight first when cutting price.
  • Never cut plating to hit a price.
  • Tie volume discounts to cost drivers.

If a supplier cannot answer three of the five, treat the quote as a starting point rather than a plan. Ask again in writing and keep the answer with the PO.

Frequently Asked Questions

Why is one Buying Guides twice the price of another?

Usually metal weight, purity and stone grade. Those three account for most of the gap.

How can I lower a price point honestly?

Reduce weight or stone size as a stated tier. Do not reduce plating or stone grade silently.

Does a thicker plate raise the price much?

A few percent per piece, and it usually lowers the claim rate. The net effect is often neutral.

Are volume discounts always real?

Only when they map to a cost driver. Otherwise they are a temporary margin transfer.

What is the safest variable to change?

Band thickness, because it is visible and easy to describe in a tier.

What belongs in the first email to a new supplier?

Spec, quantity, target price, delivery date and the QC standard. Five lines get a useful reply.

Send the Buying Guides current price and target. We return the six-variable model with the lever that moves the price without breaking the spec. See the full range at Buying Guides and HOLYCOME.

Buyers who get consistent lots are not luckier. They wrote the spec down and checked the first carton against it.