Buying Guides is a topic buyers meet twice: once when they plan the range, and once when a customer asks a question they cannot answer. This decision tree works for both.

Step one: define the job the piece has to do

Start with the buyer, not the product. A piece in this category for daily wear has a different tolerance than one for a gift box. Write the job in one sentence before you compare anything.

Daily wear means plating thickness and clasp strength. Gift means presentation and size certainty. Occasion means a scale that photographs well.

Photograph the first article before the batch runs. A shifted seat or a short prong is cheapest to fix at one piece.

Step two: set the price ceiling before the spec

Work backward from the retail price. On Buying Guides, the landed cost should sit at 25 to 35 percent of retail for wholesale programs, leaving room for the channel fee and the return allowance.

A specification that ignores the ceiling always overshoots. Set the ceiling, then choose metal and stone to fit it.

StepQuestionOutput
JobWho wears it, how often?One-sentence use case
CeilingWhat retail price?Landed cost target
PairWhich metal and stone?Price band and care story
NumbersWeight, size, microns?Verified sample spec
RecordIs it on the PO?Six-line spec

Read the table as a checklist rather than a recommendation. The right row depends on the price band, the wear pattern and the channel you sell into.

Put the forecast window in writing. Capacity priority follows predictability, not friendship.

Step three: choose the material pair

Metal and stone are one decision, not two. Silver with moissanite, gold with lab grown, platinum with natural: each pair carries its own price band, care story and disclosure.

Write the pair, then check it against the ceiling. On Buying Guides, most margin problems come from choosing the pair by taste and the ceiling by hope.

Step four: verify the three numbers

Gram weight, stone size and plating microns. These three decide the cost, the look and the durability. If a supplier cannot state all three, the specification is incomplete.

Verify them on a sample, not on a page. That is the whole of the Buying Guides decision.

Step five: write it down

Turn the decision into six lines on the PO: metal and purity, gram weight, stone type and size, plating microns, size range and packaging.

A decision that is not written is a preference, and preferences do not survive a supplier change.

The channel decides the tolerance. A boutique forgives a loupe mark; a marketplace does not. Build the inspection standard to the strictest channel you sell.

What to check before the order

Run the five checks below in order. The first two protect the money, the last three protect the launch date.

  • Start from the job, not the catalog.
  • Set the price ceiling before the spec.
  • Treat metal and stone as one pair.
  • Verify weight, size and microns on a sample.
  • Write six lines onto the PO.

If a supplier cannot answer three of the five, treat the quote as a starting point rather than a plan. Ask again in writing and keep the answer with the PO.

Frequently Asked Questions

What is the first question to ask about Buying Guides?

Who wears it and how often. That answer sets the metal, the plating and the price ceiling.

Should I choose the stone or the metal first?

Together. The pair determines the price band and the care story; choosing one first usually breaks the other.

What landed cost should I target?

Twenty-five to thirty-five percent of retail for wholesale programs, depending on channel fees and return rate.

How do I check a supplier's numbers?

Weigh the sample, measure the stone, and ask for the plating spec. Three instruments settle it.

What if the sample passes but the lot does not?

The spec was never written. Put the six lines on the PO and inspect against them.

Should I buy stock or made to order?

Stock for the top three designs, made to order for the tail. Stock cover is a calculation from sell-through and lead time.

Send the Buying Guides use case and retail price. We return a decision sheet with the material pair, the three numbers and the PO lines. See the full range at Buying Guides and HOLYCOME.

None of this is exotic. It is a document, a measurement and a date, repeated until it becomes a process.