Three price tiers of Buying Guides usually share a silhouette and differ in four places: metal weight, stone grade, setting finish and plating. Once you can name those four, tiering stops being guesswork.

The entry tier: what is actually different

Entry uses lighter metal, a smaller or lower-grade stone, a simpler setting and thinner plating. On Buying Guides, that combination is legitimate if it is disclosed, and a problem if it is sold as core.

The honest entry tier states the weight, the stone grade and the plating. The dishonest one states a look.

Seal the approved sample in a bag with the PO number. It is the only physical record that settles a claim without an argument.

The core tier: the volume workhorse

Core adds metal weight, a better cut and a thicker plate. It is the tier that carries most of the volume and most of the repeat purchase.

On Buying Guides, core is where the QC standard pays for itself: a better plate means fewer claims, and fewer claims mean a lower landed cost.

VariableEntryCorePremium
Metal weightLightStandardHeavy
StoneSmall, lower gradeGood cutCertified
SettingSimpleRefinedHand finished
Plating0.3-0.5 micron0.8 micron1.0+ micron

Read the table as a checklist rather than a recommendation. The right row depends on the price band, the wear pattern and the channel you sell into.

Keep the CAD file and the mould receipt. Ownership is a document, not an understanding.

The premium tier: where the cost sits

Premium moves to a higher metal purity, a certified stone and a hand-finished setting. The cost is in the stone and the bench time, not in the marketing.

Ask for the certificate cost as a separate line. Bundling it hides the real premium.

How to tier without confusing the buyer

Give each tier a visible difference in one dimension the customer can see: stone size, metal colour, or setting style. Do not tier on invisible variables only.

On Buying Guides, a tier the customer cannot see is a tier the customer will not pay for.

Freight is a planning line, not an emergency line. A carton that lands two weeks early costs less than one that lands two days late.

What to check before the order

Run the five checks below in order. The first two protect the money, the last three protect the launch date.

  • Tier on four visible variables.
  • State the grade at every tier.
  • Keep the certificate cost separate.
  • Make the difference visible to the customer.
  • Do not sell entry as core.

If a supplier cannot answer three of the five, treat the quote as a starting point rather than a plan. Ask again in writing and keep the answer with the PO.

Frequently Asked Questions

How do I tier Buying Guides without cheapening it?

Change one visible dimension per tier and disclose the rest. A smaller stone at entry is honest; a thinner plate sold as core is not.

Should each tier have its own SKU?

Yes. One SKU per tier keeps the spec, the photos and the claims separate.

Is the premium tier worth it?

When the stone is certified and the setting is hand finished. Those two carry the price, not the label.

How much price gap between tiers?

Roughly 1.5x from entry to core and 1.8x from core to premium for the same silhouette.

Can I use one photo for all tiers?

No. The visible difference is the reason to buy up. Shoot each tier separately.

How do I compare two quotes for this item?

Split both into metal, stone, labour, finishing and overhead, then compare line by line. A single total hides the specification difference.

Send the Buying Guides silhouette and price points. We return a three-tier matrix with the four variables and the certificate cost split out. See the full range at Buying Guides and HOLYCOME.

Buyers who get consistent lots are not luckier. They wrote the spec down and checked the first carton against it.