Care advice for Buying Guides is usually written for the customer. This one is written for the seller, because the care card you print decides the return conversation six months later.

The daily routine

Put Buying Guides on last and take it off first. That single rule removes most contact with perfume, hair product and cleaning agents, which are the three causes of plating and stone discolouration.

Wipe with a dry soft cloth after wear. Do not polish plated goods with a rouge cloth; it removes microns.

Sample by size run, not from one mixed tray. Defects cluster by size and by design, and a mixed sample hides both.

Storage that prevents scratches

Store separately in a pouch or a compartment, with the piece closed. Chains go flat, rings go in a slot, earrings go in pairs.

On Buying Guides, scratches come from other jewelry more often than from daily wear.

RiskCausePrevention
TarnishHumidity, sulfurDry storage, e-coat
Plate wearFriction, chemicals0.8+ micron, wipe after wear
ScratchesContact with other piecesSeparate storage
Stone dullnessSoap and lotion filmWarm water, soft brush
Clasp failureRepeated strainClasp check at sale

Read the table as a checklist rather than a recommendation. The right row depends on the price band, the wear pattern and the channel you sell into.

Write the remedy matrix before the first defect: remake, credit, allowance or rework, each tied to a defect class.

What to avoid, specifically

Chlorine, hot tubs, household cleaners with ammonia, and ultrasonic cleaners on plated or treated stones. Ultrasonic is fine on plain metal, not on a plated piece.

An ultrasonic cycle on a thin plate can lift the finish at the prong tips in one pass.

The care card that reduces returns

Four lines: put on last, wipe after wear, store separately, avoid chlorine. Then one line on replating: what the service costs and how long it takes.

A care card with a replating path turns a complaint into a service. On Buying Guides, that is the cheapest retention tool you have.

The specification is the product. Two pieces built to the same six lines are the same product even when the price differs; two built to different lines are not.

What to check before the order

Run the five checks below in order. The first two protect the money, the last three protect the launch date.

  • Put jewelry on last, take it off first.
  • Wipe with a dry cloth after wear.
  • Store each piece separately.
  • Avoid chlorine and ammonia.
  • Print a replating path on the care card.

If a supplier cannot answer three of the five, treat the quote as a starting point rather than a plan. Ask again in writing and keep the answer with the PO.

Frequently Asked Questions

How should Buying Guides be cleaned?

Warm water with a drop of mild soap and a soft brush, then dry with a cloth. No ultrasonic on plated or treated pieces.

Why does plating wear at the shank?

It is the contact point. Thickness and a dry wipe after wear are the two controls.

Can I use a silver polishing cloth?

On unplated sterling, yes. On plated goods, no; it removes the plate.

How should jewelry be stored?

Separately, closed, dry. A pouch per piece prevents both scratches and tarnish.

Should the care card mention replating?

Yes, with a cost and a turnaround. It converts a future complaint into a service.

How do I know a supplier is reliable?

Two clean repeat lots and two on-time shipments. Before that it is a sample, not a supplier.

Send the Buying Guides materials. We return a four-line care card plus the replating wording for your packaging. See the full range at Buying Guides and HOLYCOME.

The short version: specify the number, seal the sample, inspect against both. Everything else is negotiation.