The 4Cs — cut, colour, clarity (per GIA's diamond grading standards) and carat weight — were standardised by GIA in the 1950s and remain the shared language of the trade. You do not need to become a gemmologist. You need to know which of the four a stranger will notice at two metres, and which only shows up under a loupe. That distinction is most of the buying decision.
Cut: the one you cannot fake later
Cut describes the angles and proportions of the facets, not the shape. A well-cut diamond returns light to your eye as white sparkle (brilliance) and rainbow flashes (dispersion). A poorly cut diamond looks glassy and dark, even if its colour and clarity are flawless. GIA grades cut from Excellent down to Poor, and on a round brilliant I would never go below Very Good. On a 1ct stone the jump from Good to Excellent costs roughly 15–20% but is visible in hand.
Colour: how white is white?
Diamond colour is graded from D (colourless) to Z (noticeably yellow or brown). Most people cannot tell D from G in normal daylight, especially once the stone is set. In a yellow or rose gold setting, H to J reads perfectly white. In a platinum or white gold solitaire, step up to F or G, because the white metal makes a warmer stone look slightly cream by comparison.
Clarity: what the naked eye sees
Clarity grades how many internal inclusions a stone has. FL and IF are museum-clean, VVS1 and VVS2 are nearly clean, VS1 and VS2 are clean to the naked eye, and SI1 and SI2 are usually clean once set. Below SI2, you risk a black crystal that shows up as a dark dot. The practical sweet spot for most buyers is VS2 or SI1: you save 15–25% over VVS and nobody but a trained grader can tell.
Carat: weight, not size
One carat is 0.2 grams. Carat weight scales price steeply because bigger rough crystals are rarer: a 1.0ct stone is not twice the price of a 0.5ct, it is closer to four times. Cut also affects apparent size — a well-cut 0.90ct can look as large as a shallow-cut 1.0ct. Do not shop by weight alone.
- Round brilliant: premium price, best sparkle, most popular.
- Oval or pear: 0.2–0.4ct extra for the same budget, lengthens the finger.
- Cushion: softer sparkle, forgiving of lower clarity.
- Emerald cut: shows clarity plainly, so step up a grade if you choose it.
| Grade | Visible at 30cm? | Where to land | Typical saving vs top grade |
|---|---|---|---|
| Cut: Excellent | Yes | Always pick Excellent/Very Good | — |
| Colour: H | Barely, in white metal | H–G is the sweet spot | ~20% over D |
| Clarity: VS2 | No, when set | VS2 or SI1 | ~30% over VVS |
| Carat: 0.90ct | Looks ~1.0ct face-up | 0.90 vs 1.0 saves 15% | ~15% at the 1ct boundary |
The compromise that works
How to split a fixed budget
Picture a £3,000 centre stone. The worst outcome is a 0.6ct stone graded D/FL that looks dull in a poor cut. The best outcome is a 0.8ct stone graded G/VS2 in an Excellent cut, which reads livelier and bigger on the hand. The order of priority, when money is tight, is cut first, then carat, then colour, then clarity. People occasionally ask whether it is ever worth going below VS2 to buy a bigger stone — usually yes, if the inclusion is placed at the edge, usually no if it is a central black crystal. A good jeweller will show you both and let the loupe decide.
Cut grades mean different things by shape
GIA publishes a formal cut grade only for round brilliants. For fancy shapes — oval, cushion, pear, emerald, radiant — there is no single letter grade, and you have to judge proportions by eye. On an oval or pear, look for a length-to-width ratio between about 1.3 and 1.5: beyond that the stone looks narrow, inside it reads almost round. On an emerald cut, watch for a dark 'window' in the centre, which happens when the stone is cut too shallow. These are the things a trained eye checks in ten seconds; they are also the things a glossy product photo will not show you.
Which certificate to trust
GIA is the industry reference and grades conservatively. AGS is equally respected, particularly on cut. IGI is widely used on lab-grown diamonds and tends to grade slightly more generously, which matters if you are comparing an IGI stone against a GIA one side by side. A certificate from an unknown or in-house laboratory, however, is worth the paper it is printed on — anyone can grade their own stones leniently. For a natural diamond over £1,500, insist on GIA or AGS; for a lab-grown stone, IGI is normal and acceptable.
If I had to give one rule, it is this: spend on cut, hold colour at G–H, clarity at VS2, and push carat as high as the budget allows. People notice a lively, well-proportioned stone; they do not notice whether it is a VS2 or a VVS2 when it is on her hand. For a deeper look at one of these, read our guide to diamond clarity grades next.
Related Reading
- I1, I2, I3 Clarity: What Included Diamonds Actually Mean
- Diamond Table and Depth Percentages: What the Numbers Actually Mean
- VS1 vs VS2 Diamond Clarity: Which Grade to Buy
Frequently Asked Questions
Is moissanite a good diamond alternative for retail buyers?
Yes for price-sensitive customers who want brilliance and hardness. Moissanite ranks 9.25 on the Mohs scale, holds up to daily wear and costs a fraction of a natural diamond of the same size, so it resells fast in bridal and fashion lines.
What is the minimum order for wholesale moissanite?
MOQ starts at 50 pieces per design for stock items. Custom cuts and private-label settings usually start at 100–300 pieces depending on the mold.
Do you provide certificates with moissanite stones?
Yes. Every parcel ships with GRA or IGI documentation listing carat weight, color grade and cut. We recommend passing the certificate to your end customer for trust.
How long does sample and bulk production take?
Samples ship in 3–5 days. Bulk runs take 15–20 days under 500 pieces, and 25–30 days for custom work.