What the Quote Actually Covers
The brief was simple: 200 care and Maintenance, 925 sterling silver with rhodium or e-coat, delivered before June. The run that arrived carried 17 pieces with tarnish in transit, and the buyer spent USD 10-25 on sorting before the goods reached a shelf, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 9-50.
On a 200-piece order at USD 9-50, a tarnish in transit rate above two percent is not a quality surprise. It is a costing error that shows up as a credit note three weeks later.
Nothing in the rebuild was expensive. A gauge, a written limit and a retained tray did the work that a discount would only have delayed, which is how the Private Label Carton account reads it at USD 9-50.
What US buyers Check Before They Sign
At USD 9-50 per piece the four measurements below are worth more than the discount being negotiated. One of them costs nothing to write down.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Stone colour consistency | Graded by eye under D65 | Colour matched to a retained master stone, per tray | Repeat colour complaint in the same SKU |
| Sizing drift across the run | Not measured | Go/no-go gauge on every size, drift held under 0.15 mm | Resize queue and reship cost |
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
Write these into the Private Label Carton purchase order and the arrival check becomes arithmetic instead of recollection, with GRA report and private-label carton with hangtag stated on the same sheet.
Private Label Packaging for care and Maintenance
Private label changes four things and none of them is the piece: the stamp, the hangtag, the box and the barcode. Get those four aligned before the first bulk run or the carton arrives with your name spelled two ways, shipped as private-label carton with hangtag and certified GRA report.
The stamp goes inside the shank or on the clasp tag, and it has to be small enough not to break the surface on a thin care and Maintenance. Below 0.8 mm of shank width we recommend the hangtag only, which is how the Private Label Carton account reads it at USD 9-50.
Cartons are quoted at 200 pieces with the label printed, not stickered, because a sticker on a matte box reads as a repack. Lead time adds three days for the print run, which is why private label starts later than stock, on a 200-piece Private Label Carton order at USD 9-50.
Where USD 9-50 Per Piece Actually Goes
Cost at USD 9-50 leaves no room for assumption. The table shows which line compresses and which line only moves quality down.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for care and Maintenance | 30% | Alloy choice and casting yield |
| Stone or melee for care and Maintenance | 20% | Sieve range and lot batching |
| Setting and finishing labor for care and Maintenance | 19% | Jig design and bench minutes |
| Plating, polish and QC for care and Maintenance | 12% | Per-tray versus per-piece checks |
| Packaging for care and Maintenance | 19% | private-label carton with hangtag |
A factory that cannot state its bench minutes per piece has never costed its own line. Ask for minutes and for the reject rule, not for a discount, the figure being USD 9-50 for a 200-piece run.
The Three Failures We See Most in Incoming Samples
weight shortfall
A 2.1 g ring shipped at 1.85 g passes a casual check and fails a scale. Publish the weighed average per SKU, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 9-50.
The commercial effect is tarnish claims and replacements, typically USD 4-7 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, certified GRA report and packed private-label carton with hangtag at 200 pieces.
tarnish in transit
Silver that ships without an anti-tarnish strip browns in a humid container. The strip costs 3 cents and removes the most common arrival complaint, priced at USD 9-50 for the 200-piece Private Label Carton run.
Our countermeasure is a gauge and a written limit. It adds about 11 seconds per piece and removes the defect from the run rather than from the carton, priced at USD 9-50 for the 200-piece Private Label Carton run.
rhodium adhesion
A silver surface plated without a palladium strike layer blisters in wear. The strike layer is invisible and essential, certified GRA report and packed private-label carton with hangtag at 200 pieces.
In a 200-piece run this typically shows on 11 of pieces. Catching it means measuring silver assay at 92.5% minimum at the tray level, not inspecting the finished carton, on a 200-piece Private Label Carton order at USD 9-50.
Order Terms, Sample Timing and Packing
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 200-piece Private Label Carton order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, which is how the Private Label Carton account reads it at USD 9-50.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 9-50 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the private-label carton with hangtag format at 200 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, shipped as private-label carton with hangtag and certified GRA report.
Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of silver assay at 92.5% minimum for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 9-50.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, priced at USD 9-50 for the 200-piece Private Label Carton run.
Sample to Container: The Real Calendar
The short version for care and Maintenance: it is arithmetic, not relationship. The long version is below, which is USD 9-50 on the Private Label Carton schedule.
The commercial version of this question for care and Maintenance is simple: what does a failure cost the buyer, and who pays it. In our terms the answer is a replacement inside the same order cycle, with the retained reference tray as the arbiter, the figure being USD 9-50 for a 200-piece run.
That clause matters more than a discount on care and Maintenance. A 4% lower unit price disappears on the first rejected tray; a written responsibility clause does not, quoted at USD 9-50 per piece in private-label carton with hangtag.
AQL, Tray Checks and What a QC Report Should Say
Every year we see the same omission in care and Maintenance spec sheets, and every year it costs a buyer a season, which the Private Label Carton file records at USD 9-50 in private-label carton with hangtag.
We run this check per tray rather than per carton because the defect that matters on care and Maintenance is the one that repeats. A single odd piece is noise; a pattern across one tray is a process problem and it will be in every tray made after it, shipped as private-label carton with hangtag and certified GRA report.
The report the buyer receives states the count per tray, the measured average and the outlier count for care and Maintenance. It is deliberately unglamorous, and it is the document that settles most disputes before they start, with GRA report and private-label carton with hangtag stated on the same sheet.
How a Repeat Order Gets Built
Nothing in this sequence is unusual, and that is the point. Each step exists because skipping it produced a specific failure on a previous order, shipped as private-label carton with hangtag and certified GRA report, which is how the Private Label Carton account reads it at USD 9-50.
- Agree the stamp position, the hangtag copy and the box print before the first carton.
- Print the cartons and hangtags in one run: a sticker on a matte box reads as a repack.
- Set the barcode and the FNSKU mapping for every SKU before the label file is approved.
- Build the first carton at the quoted quantity so the pack-out is proven, not assumed.
- Hold a retained carton as the pack reference for every reorder.
Reorders inside this sequence run 12-15 days because the model, the gauge set and the signed spec stay in our system, and at USD 9-50 for 200 pieces that is the number the buyer signs.
What This Means for a First Order
A first Private Label Carton order of 50 pieces per design at USD 9-50 tests the line rather than the range. Three designs covers the shelf.
Ask for the retained tray and the GRA report batch sheet with the first shipment. Both are free and both decide the reorder, and the Private Label Carton quote for it sits at USD 9-50.
Freight, Duty and the Arrival Check
Export runs through Guangzhou or Shenzhen. Air lands in 5-8 days on the US west coast, 7-10 on the east, and sea takes roughly three times the transit, which is USD 9-50 on the Private Label Carton schedule.
FOB is the default on care and Maintenance and DDP is the option. Buyers new to the American bridal market usually take DDP once, then switch after they see the breakdown, on a 200-piece Private Label Carton order at USD 9-50.
If tarnish in transit appears in the arrival check, the retained tray decides who owns it. Keep the GRA report batch sheet in the same folder as the packing list, and the Private Label Carton quote for it sits at USD 9-50.
Frequently Asked Questions
What is the minimum order for care and Maintenance?
50 pieces per care and Maintenance. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, which is USD 9-50 on the Private Label Carton schedule.
Do you supply certificates for care and Maintenance?
GRA report on care and Maintenance above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of silver assay at 92.5% minimum, which is what a counter or a listing actually needs, priced at USD 9-50 for the 200-piece Private Label Carton run.
How do you handle a rejected tray?
We replace or credit inside the same order cycle. The retained reference tray decides: if tarnish in transit shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, on a 200-piece Private Label Carton order at USD 9-50.
What are the payment terms?
30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 9-50.
What is the minimum order for care and Maintenance?
50 pieces per care and Maintenance. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, which is USD 9-50 on the Private Label Carton schedule.
Next Step
The next step is a sample in 3-5 days, not a container. Write to service@holycome.com or WhatsApp +86 18078079070, subject Private Label Carton, and the Private Label Carton quote for it sits at USD 9-50.
HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, which the Private Label Carton file records at USD 9-50 in private-label carton with hangtag.
Related reading: Care & Maintenance Vermeil Upgrade: MOQ, Mixed Designs and the Real First Order - HOLYCOME Wedding Rings Valentine Program: How the Second Order Becomes Cheaper - HOLYCOME