The Reject Tray Policy That Decides a Partnership in the Made to Order Program

A US buyer of care and Maintenance sent us a competitor's care and Maintenance in February with one question: why does this fail at tarnish in transit after a season. We measured it, rebuilt the spec around silver assay at 92.5% minimum and plating adhesion after a 24-hour humidity test, and shipped 50 care and Maintenance that cleared inspection with zero rejects, shipped as single-piece foam box and certified IGI report.

At 50 pieces the buyer was not buying a defect, they were buying a document. The Made to Order order carried a photo and a price, and tarnish in transit had nowhere to live, certified IGI report and packed single-piece foam box at 50 pieces.

Care & Maintenance wholesale piece from the HOLYCOME line in Wuzhou

Our rebuild kept the buyer's retail price and changed four numbers on the bench. The next run cleared inspection because the specification traveled with the tray, not with a phone call, which is USD 10-52 on the Made to Order schedule.

The Made-to-Order Path for care and Maintenance

Made-to-order is a different production line, not a slower version of stock. It starts with a signed drawing, then a wax or resin model, then a casting, then setting, then finish, and each stage can fail on its own, and the Made to Order quote for it sits at USD 10-52.

Twenty days is realistic for a new care and Maintenance when the model exists and only the stone changes. A new model adds a day for the CAD, a day for the print, and a day for the buyer to approve the render before metal is committed, quoted at USD 10-52 per piece in single-piece foam box.

The risk sits in approval, not in the bench. A buyer who approves a render on a phone screen and rejects the casting has bought a prototype, not a product. We send the render at 1:1 scale with a millimetre grid for that reason, which is how the Made to Order account reads it at USD 10-52.

Care & Maintenance setting and finish detail on a HOLYCOME factory sample

Three Failures That Reach the Made to Order Bench

rhodium adhesion

A silver surface plated without a palladium strike layer blisters in wear. The strike layer is invisible and essential, priced at USD 10-52 for the 50-piece Made to Order run.

The commercial effect is tarnish claims and replacements, typically USD 4-7 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, priced at USD 10-52 for the 50-piece Made to Order run.

weight shortfall

A 2.1 g ring shipped at 1.85 g passes a casual check and fails a scale. Publish the weighed average per SKU, and at USD 10-52 for 50 pieces that is the number the buyer signs.

Our countermeasure is a gauge and a written limit. It adds about 11 seconds per piece and removes the defect from the run rather than from the carton, the figure being USD 10-52 for a 50-piece run.

tarnish in transit

Silver that ships without an anti-tarnish strip browns in a humid container. The strip costs 3 cents and removes the most common arrival complaint, the figure being USD 10-52 for a 50-piece run.

In a 50-piece run this typically shows on 8 of pieces. Catching it means measuring silver assay at 92.5% minimum at the tray level, not inspecting the finished carton, and the Made to Order quote for it sits at USD 10-52.

Four Spec Lines a Made to Order Buyer Checks

Most quotes describe the care and Maintenance and skip the part that determines the buyer's margin. Those four lines are listed below with the trade default beside our standard, on a 50-piece Made to Order order at USD 10-52.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Clasp spring lifeSampled by handCycled 500 times on a jig per lotDetach claim and brand damage
Prong tension and seat depthChecked by feel at the benchPull-tested per piece, seat depth written on the sheetStone loss and total replacement
Hallmark depth and placementStamped where it fitsFixed position, depth measured so it never breaks the shankCustoms query and remaking
Solder flow at the jointNot inspectedJoint inspected under 10x before settingCrack at the seam in transit

Write these four into the purchase order and the argument after delivery becomes arithmetic rather than recollection, with IGI report and single-piece foam box stated on the same sheet, on a 50-piece Made to Order order at USD 10-52.

Terms Behind a Made to Order Order

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 50-piece Made to Order order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, which the Made to Order file records at USD 10-52 in single-piece foam box.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 10-52 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the single-piece foam box format at 50 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, priced at USD 10-52 for the 50-piece Made to Order run.

Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of silver assay at 92.5% minimum for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, quoted at USD 10-52 per piece in single-piece foam box.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, the figure being USD 10-52 for a 50-piece run.

Cost Split on a Made to Order Piece at USD 10-52

At USD 10-52 per piece for care and Maintenance, the stone is roughly a quarter and labor is where two quotes for the same drawing diverge.

Cost lineShareWhat moves it
Base metal or alloy for care and Maintenance32%Alloy choice and casting yield
Stone or melee for care and Maintenance23%Sieve range and lot batching
Setting and finishing labor for care and Maintenance21%Jig design and bench minutes
Plating, polish and QC for care and Maintenance14%Per-tray versus per-piece checks
Packaging for care and Maintenance10%single-piece foam box

The saving in the cheapest care and Maintenance quote hides in the plating line and the stone grade. Both appear in season two, not on arrival, and the Made to Order quote for it sits at USD 10-52.

MOQ, Mixed Designs and the Real First Order

Buyers who have run three programs on care and Maintenance know this instinctively; first-time buyers learn it the expensive way, and 50 pieces leaves Wuzhou in single-piece foam box at USD 10-52.

Three numbers decide it for care and Maintenance: the tolerance band, the inspection density and the responsibility clause. Write all three down and the rest of the negotiation is arithmetic. Leave any of them out and it becomes a discussion about intent, which the Made to Order file records at USD 10-52 in single-piece foam box.

We send a one-page sheet with every care and Maintenance quote that states those three, plus the retained-tray rule. Buyers who compare on it usually find that the gap between suppliers is smaller than the gap between the specs they were comparing, which the Made to Order file records at USD 10-52 in single-piece foam box.

Sample to Container: The Real Calendar

The short version for care and Maintenance: it is arithmetic, not relationship. The long version is below, which the Made to Order file records at USD 10-52 in single-piece foam box.

There is a version of this that looks cheaper on paper and costs more in practice: quoting the best case on care and Maintenance and letting the buyer discover the spread. It works once. The second order goes to whichever supplier quoted honestly, the figure being USD 10-52 for a 50-piece run.

We would rather lose a first order of care and Maintenance on price than explain a defect after it lands. That position is unusual in this category and it is the reason our reorder share is high, on a 50-piece Made to Order order at USD 10-52.

The First Made to Order Order

The point of a small first run is not the margin. It is finding out whether the supplier's paperwork survives contact with the actual goods, the figure being USD 10-52 for a 50-piece run.

The first order is the cheapest inspection a buyer will ever run, because the volume is small enough to check every tray by hand, shipped as single-piece foam box and certified IGI report, quoted at USD 10-52 per piece in single-piece foam box.

Getting single-piece foam box to US wholesale

Export runs through Guangzhou or Shenzhen. For Made to Order orders the IGI report file travels with the shipping documents, not separately, and the Made to Order quote for it sits at USD 10-52.

The clearance term matters more than the rate at 50 pieces. A duty surprise can cost more than the whole freight line, the figure being USD 10-52 for a 50-piece run.

The arrival check is three steps: count cartons against the packing list, weigh a sample tray, and measure ten pieces against silver assay at 92.5% minimum and plating adhesion after a 24-hour humidity test, certified IGI report and packed single-piece foam box at 50 pieces, priced at USD 10-52 for the 50-piece Made to Order run.

The Calendar Behind a Made to Order Run

For single-piece foam box at 50 pieces, the sequence is fixed and the dates are the only thing that moves, certified IGI report and packed single-piece foam box at 50 pieces.

  1. Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
  2. Cut the model in wax or resin and photograph it on the gauge before metal is committed.
  3. Cast the first article, set the stones and finish it exactly as bulk will be finished.
  4. Send the first article for approval with the weight and the stone measurements stated.
  5. Run the balance of the order in 25-30 days, holding the approved article as the reference.
  6. Ship with the approved article photographed beside a production piece from the same tray.

MOQ stays at 50 pieces per design on care and Maintenance, low enough to test a shelf and high enough to keep the gauge check independent, which is how the Made to Order account reads it at USD 10-52.

Frequently Asked Questions

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, which is USD 10-52 on the Made to Order schedule.

How long does a reorder of the same care and Maintenance take?

With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, certified IGI report and packed single-piece foam box at 50 pieces.

What finish do you use, and how thick is it?

Rhodium at 0.20 micron minimum on white care and Maintenance, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, the figure being USD 10-52 for a 50-piece run.

How is care and Maintenance packed for single-piece foam box?

Every unit goes into a foam-backed pouch, then the single-piece foam box, then the outer carton at 50 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, and the Made to Order quote for it sits at USD 10-52.

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, which is USD 10-52 on the Made to Order schedule.

Next Step

If the USD 10-52 band fits your shelf, send the drawing and we will quote the 50-piece Made to Order run inside one business day.

HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across care and Maintenance and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, with IGI report and single-piece foam box stated on the same sheet.

Related reading: Care & Maintenance Private Label Carton: What the Quote Actually Covers - HOLYCOME Wedding Rings Q4 Holiday Stock: The Sample Approval That Survives Production - HOLYCOME