Why the Distributor Tier Quote Looks Cheap Until It Lands
In January, a US buyer of buying Guides ordered 800 buying Guides and asked for the same lost-wax cast as a competitor's sample. What arrived matched the photo and missed the drawing, and 13 pieces had to be reworked at the buyer's expense, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 36-199.
In the Distributor Tier file the failure was already written down. Prong geometry sat in the buyer's own incoming report from the previous season and nobody carried it forward, so the same line failed twice, and at USD 36-199 for 800 pieces that is the number the buyer signs.
The second run shipped bulk carton, 50 per bag with the spec stapled to the packing list. Zero rejects on arrival, and the buyer's own bench stopped re-inspecting, on a 800-piece Distributor Tier order at USD 36-199.
What a USD 36-199 Quote Hides
The 800-piece Distributor Tier price splits as below. The line that decides season two is the plating and QC share, not the metal, and the Distributor Tier quote for it sits at USD 36-199.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for buying Guides | 34% | Alloy choice and casting yield |
| Stone or melee for buying Guides | 25% | Sieve range and lot batching |
| Setting and finishing labor for buying Guides | 22% | Jig design and bench minutes |
| Plating, polish and QC for buying Guides | 15% | Per-tray versus per-piece checks |
| Packaging for buying Guides | 4% | bulk carton, 50 per bag |
Five lines, one price. If the supplier will not break them out, the number being compared is not a buying Guides price, on a 800-piece Distributor Tier order at USD 36-199.
The Measurements Behind a USD 36-199 Quote
Specification is the only part of a buying Guides quote that survives the season. These four measurements are what we write into the bulk carton, 50 per bag paperwork, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
Every line above is measurable with a gauge and a scale. At USD 36-199 per piece, a supplier who cannot state them is selling a photo.
Distributor Pricing Tiers on buying Guides
A distributor does not buy a buying Guide, they buy a position. Tier pricing is quoted against annual volume with a floor per SKU, and the tier is reviewed on shipped units rather than on forecast, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
What the tier buys is protection: a defined territory, a no-direct-sell clause inside that territory, and a first look at new models for one season. Without those three lines the discount is just a lower price and the distributor will not hold stock for you, which is USD 36-199 on the Distributor Tier schedule.
Turn is the number the distributor manages. At USD 36-199 per piece and a 45-day turn, the margin per shelf foot is thin. That is why bulk orders of buying Guides move in 800-piece lots rather than in the 50-piece sample quantity.
What Fails First on buying Guides
prong geometry
A prong that grips the girdle instead of the pavilion survives the showroom and fails the third ultrasonic clean. The seat has to be cut to the pavilion angle before the prongs close, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
Our countermeasure is a gauge and a written limit. It adds about 22 seconds per piece and removes the defect from the run rather than from the carton, and the Distributor Tier quote for it sits at USD 36-199.
rhodium burn-off
A 0.05 micron rhodium layer reads white in the tray and shows yellow at the shank in six months of daily wear. Thickness, not bath chemistry, is the variable that matters, and at USD 36-199 for 800 pieces that is the number the buyer signs.
In a 800-piece run this typically shows on 11 of pieces. Catching it means measuring stone retention after a 40-cycle wear test at the tray level, not inspecting the finished carton, on a 800-piece Distributor Tier order at USD 36-199.
size-step drift
A run gauged at size 6 and estimated elsewhere ships a size 8 that measures 7.75. The mismatch shows up as a resize queue two weeks after launch, quoted at USD 36-199 per piece in bulk carton, 50 per bag.
The commercial effect is a return shipment plus a resize labor claim, typically USD 9-14 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which is USD 36-199 on the Distributor Tier schedule.
MOQ, Samples and the Balance
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 800-piece Distributor Tier order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 36-199 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the bulk carton, 50 per bag format at 800 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which is how the Distributor Tier account reads it at USD 36-199.
Certification is SGS batch report for the lots that carry it, with a batch report and per-piece measurement of stone retention after a 40-cycle wear test for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, which the Distributor Tier file records at USD 36-199 in bulk carton, 50 per bag.
The Sample Approval That Survives Production
Every year we see the same omission in buying Guides spec sheets, and every year it costs a buyer a season, and the Distributor Tier quote for it sits at USD 36-199.
One practical note on timing for buying Guides: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, on a 800-piece Distributor Tier order at USD 36-199.
We date the buying Guides proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, and the Distributor Tier quote for it sits at USD 36-199.
How the Second Order Becomes Cheaper
The number is less interesting than the rule behind it, and buying Guides is where that rule gets tested, which the Distributor Tier file records at USD 36-199 in bulk carton, 50 per bag.
In US e-commerce terms, this is the difference between a landed cost the buyer can plan against and a number that moves after the container ships. For buying Guides, we publish the figure per SKU and hold it for the order window rather than for the calendar year, the figure being USD 36-199 for a 800-piece run.
Practically, it shows up in three places for buying Guides: the proforma, the QC sheet and the credit note if something goes wrong. All three should quote the same number. When they do not, the argument is about paperwork, not about the product, which the Distributor Tier file records at USD 36-199 in bulk carton, 50 per bag.
From Spec to bulk carton, 50 per bag
Our process is deliberately boring, because boring is what survives a bulk run with several sets of hands on it, with SGS batch report and bulk carton, 50 per bag stated on the same sheet, priced at USD 36-199 for the 800-piece Distributor Tier run.
- Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
- Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
- Approve the sample in writing, including the reject rule and the retained reference tray.
- Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
- Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.
A first order at 50 pieces per design is a measurement rather than a purchase. It tells you what stone retention after a 40-cycle wear test and prong tip height within +/-0.10 mm looks like from this line, priced at USD 36-199 for the 800-piece Distributor Tier run.
The Dock Check on buying Guides
We ship from Guangzhou or Shenzhen, and the port choice follows the carrier rate rather than a fixed habit, and the Distributor Tier quote for it sits at USD 36-199.
DDP suits a first Distributor Tier order because the duty invoice arrives after the carton clears, and that is the line buyers forget to budget, which is USD 36-199 on the Distributor Tier schedule.
The arrival check is three steps and none needs a lab: count against the packing list, weigh a sample, measure ten pieces, which is how the Distributor Tier account reads it at USD 36-199.
A 800-Piece Test Run
The first order should be small enough to inspect completely and large enough to keep the gauge check independent of the shift, which the Distributor Tier file records at USD 36-199 in bulk carton, 50 per bag.
Put the reject rule in writing before the deposit. The Distributor Tier conversation after arrival is shorter when the rule is on the order already, which is how the Distributor Tier account reads it at USD 36-199.
Frequently Asked Questions
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white buying Guides, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, quoted at USD 36-199 per piece in bulk carton, 50 per bag.
How is buying Guides packed for bulk carton, 50 per bag?
Every unit goes into a foam-backed pouch, then the bulk carton, 50 per bag, then the outer carton at 800 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 36-199.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, the figure being USD 36-199 for a 800-piece run.
How long does a reorder of the same buying Guide take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, which is how the Distributor Tier account reads it at USD 36-199.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white buying Guides, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, quoted at USD 36-199 per piece in bulk carton, 50 per bag.
Next Step
Send a photo or a drawing of the piece you want in bulk carton, 50 per bag, and the reply carries a price, a calendar and the four measurements, which the Distributor Tier file records at USD 36-199 in bulk carton, 50 per bag.
The factory behind buying Guides here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 18078079070 on WhatsApp, the figure being USD 36-199 for a 800-piece run.
Related reading: Diamonds & 4Cs Trade Show Sample: What a Report Proves and What It Does Not - HOLYCOME Diamonds & 4Cs Shopify DTC: AQL, Tray Checks and What a QC Report Should Say - HOLYCOME