You have chosen the engagement ring. The wedding band, though, has to sit against it for fifty years, and solitaire settings do not always play nicely with a straight band. The mismatch shows up as a gap, a tilt, or a band that never sits flush. This is what 'stack height' means, and the simple ways to fix it.
Why they do not always sit flush
A solitaire raises its centre stone on prongs and a basket. A plain flat band slides under that basket and stops against it, leaving a visible gap. The gap is purely mechanical — the two rings are different heights — but it drives people mad over time. The fix is either a shaped band that curves around the solitaire's base, or a flat band chosen in a height that matches.
The three band options
- Straight band: works if the solitaire sits low on the finger (a 'low basket'). Cheapest, simplest.
- Curved / fitted band: shaped to follow the solitaire's outline. Costs £50–£150 more, but sits flush.
- Notched / chevron band: a V-shape that cups a solitaire or three-stone ring. Popular for higher settings.
| Setting height | Best band | Typical added cost |
|---|---|---|
| Low basket (stone close to finger) | Straight band | £0 |
| Medium solitaire | Slight curve | £50–£100 |
| High-set stone, side stones | Notched or chevron | £100–£200 |
Decide the band at the same time as the ring
Matching the metal or mixing on purpose
Traditionally the wedding band matches the engagement ring's metal — platinum with platinum, yellow gold with yellow gold. Modern couples increasingly mix: a yellow gold band against a white gold solitaire, deliberately. There is no mechanical reason not to. The one subtlety is hardness: a platinum band worn tight against a softer white gold ring will, over decades, wear a small channel into the softer metal. Most jewellers compensate by shaping the band to float against the solitaire rather than press into it. If you mix metals, ask about this when you order.
The comfort question
Two rings worn together feel different from one ring. A thick solitaire and a thick band stacked can catch on gloves, sleeves and the steering wheel. A lower-profile stack — a slimmer band against a moderate solitaire — sits more comfortably for daily wear. If one of you works with your hands, this is worth more than it sounds: a ring that catches on everything comes off more often, and rings that come off get lost. Try the stack on the actual hand, not just on a display stand.
Resizing after the wedding
If the stack needs to go up a size later, both rings usually resize together — the solitaire and the band, in the same workshop visit, so they stay matched. A shaped band that was made for a specific solitaire cannot be swapped onto a different ring later, which is why getting the metal and shape right the first time matters.
Three rings, eventually
Many couples add an eternity ring later, which turns a two-ring stack into three. The same height logic applies: the eternity band should be chosen to sit flush against the existing two, or the three rings will tilt and wear against each other. If you think you might add an eternity ring in a few years, choose a wedding band now whose profile works with a future third ring — a lower, simpler band stacks more predictably than a carved one. This is a small thing to plan for, but it saves re-buying a band later.
The whole point of thinking about stack height in advance is to avoid a gap that bugs you for decades. A ring that sits flush looks intentional; a ring that tilts against its neighbour reads as a mismatch, even when the two bands were bought together. The small extra cost of a shaped or fitted band, ordered alongside the engagement ring, is the difference between a stack that looks designed and one that looks assembled. It is one of those details you stop noticing once it is right, and keep noticing if it is wrong. Spend the extra £50 or £100 on a fitted band now, rather than living with a gap for decades. Your future self, looking at the stack every morning, will not mind. It is a small detail that pays you back for decades.
The cleanest results happen when the wedding band is ordered from the same maker, using the engagement ring as the template. If you buy the engagement ring online and then try to match a band in a local shop, the shapes rarely align perfectly. Bring the engagement ring with you when you choose the band — or, better, order them together. For the metal choice behind the band, our platinum versus white gold guide covers upkeep and cost.
The Wikipedia entry on engagement rings gives an independent overview of engagement ring traditions and settings.
Related Reading
- Gold vs Platinum Weight: The Density Numbers Buyers Ask About
- Everyday Rings: Which Metal Lasts the Longest
- Platinum vs Sterling Silver Wears
Frequently Asked Questions
What ring sizes can you supply in bulk?
US sizes 5–12 including half sizes. Send a size breakdown with your order and we cast to that curve; comfort-fit inner bands reduce resize requests.
Can I order a mixed size run instead of one size?
Yes. Mixed runs are standard for wholesale: specify quantity per size and we pack and label by size at no extra labor cost.
What is the MOQ for custom ring designs?
50 pieces per design for existing molds; 100–300 pieces when a new mold or CAD model is required.
How should I price rings for retail margin?
Most partners use a 3–4x markup on FOB cost for sterling and 2.5–3x for moissanite solos, which keeps landed cost under 30% of retail.