A shipment of 200 silver rings arrived with a yellow-brown haze on the shanks. The pieces had been packed in a foam insert that contained sulphur, and the tarnish developed in transit over three weeks. Replacing the insert cost a fraction of the rework.

Tarnish is not a quality failure in the metal. It is a reaction between the alloy and sulphur compounds in air, and it is driven by humidity, temperature and the materials touching the piece. That makes it a packaging decision as much as a metallurgy one.
What tarnish actually is
Silver reacts with sulphur-containing gases to form silver sulphide, a dark film on the surface. The reaction is slow at low humidity and fast in warm, humid air with sulphur present.
The role of copper
Sterling silver is 92.5 percent silver and 7.5 percent other metal, usually copper. Copper also reacts with sulphur, and its reaction products are darker. That is why 925 tarnishes visibly where 999 silver would stay bright longer.
The role of humidity
Water vapour carries sulphur compounds to the surface and accelerates the reaction. A piece stored at 40 percent relative humidity tarnishes far more slowly than the same piece at 70 percent.
Materials that cause tarnish
Some packaging materials are active participants in the reaction. The list is short and the consequences are large.
| Material | Effect | Use instead |
|---|---|---|
| Sulphur-containing foam | Direct sulphur source | Sulphur-free polyethylene foam |
| Vulcanised paper | Releases sulphur compounds | Acid-free tissue |
| Some adhesives | Sulphur in the binder | Adhesive-free wraps |
| PVC bags | Plasticiser vapour | Anti-tarnish poly bags |
| Wood boxes, unsealed | Acidic vapours | Sealed or lined boxes |
The foam insert is the most common culprit in wholesale shipments, because it is cheap, soft and widely used. Ask the packaging supplier for a sulphur statement, and test a sample before committing a season to it.
A simple test
Place a polished silver test piece in contact with the material in a sealed bag, and leave it in a warm place for seven days. A material that causes tarnish will show a visible haze. The test costs one ring and one week.
Run the test again when a packaging supplier changes material or a new box design arrives. The change is usually invisible in a sample and obvious in the test, which is exactly the point.
Materials that prevent tarnish
Three categories do most of the work: barrier, absorber and inhibitor.
Barrier
A sealed bag keeps humid air away from the surface. The bag has to be closed, and a bag with a pinhole is not a barrier. Vacuum or near-vacuum packing is the strongest option for long storage.
Absorber
Desiccant sachets reduce humidity inside a sealed container. Silica gel is the standard choice, and it saturates over time, so a sachet in a box that is opened weekly stops working within months.
Inhibitor
Anti-tarnish paper and strips release a vapour that interferes with the reaction. They work best in a closed space and they lose effectiveness as the space is opened. Combine an inhibitor with a barrier for the best result.
- Sealed anti-tarnish bag: barrier plus inhibitor
- Desiccant sachet: humidity control, needs a sealed container
- Anti-tarnish paper: short to medium term in a closed box
Storage routine for bulk stock
A storage routine is a sequence, and skipping a step undoes the rest.
Clean and dry before storage
A piece stored with a fingerprint tarnishes at the fingerprint first. Clean, rinse and dry fully before the piece enters storage, and handle with gloves from that point.
Store in the smallest sealed space
A piece in a small sealed bag tarnishes more slowly than the same piece in a large box, because the volume of air and its sulphur content are smaller. Individually bagged pieces outperform a tray of loose pieces by a wide margin.
Control the room
Store bulk stock below 50 percent relative humidity and away from kitchens, rubber, cardboard and cleaning chemicals. A stock room next to a kitchen is a stock room that tarnishes.
- Clean and dry the piece
- Handle with gloves
- Place in an anti-tarnish bag with the air reduced
- Add a desiccant sachet for long storage
- Store below 50 percent humidity, away from sulphur sources
- Re-inspect every 90 days
The sixth step is the one that catches a packaging failure before a customer does. A 90-day inspection on bulk stock finds the first haze while it is still removable with a cloth.
Tarnish and plating together
A rhodium-plated piece is protected where the plating is intact and unprotected where it is worn or thin. That means a plated piece tarnishes at the edges first, and the tarnish reads as a plating failure even when the plating is present.
Where plated pieces fail
Prong tips, shank edges and clasp interiors. These are the zones with the thinnest effective plate, and they are the zones where a customer sees the first dark line.
What to specify
For a plated programme, specify both the plating thickness and the packaging. Thickness alone does not survive a sulphur-containing insert, and packaging alone does not cover a thin plate at the edge.
Removing tarnish when it appears
The removal method depends on severity, and the wrong method removes more than tarnish.
| Severity | Method | Risk |
|---|---|---|
| Faint haze | Anti-tarnish cloth | Low |
| Light film | Mild dip, short contact | Can affect plating |
| Heavy tarnish | Polish, then replate if plated | Removes metal |
A dip that is safe on unplated silver can strip a thin plate, so check the piece before choosing the method. On plated stock, a cloth is the safe default and a dip is a decision, not a routine.
What our packaging terms look like
We pack silver in anti-tarnish bags with a desiccant sachet for orders shipped by sea or held in storage, and we state the packaging material on the packing list. Sulphur-free foam is standard on boxed sets.
Minimum order is 50 pieces per design. Stock ships in three to five days and bulk in fifteen to twenty days under 500 pieces. Payment is a 30 percent deposit with the balance before shipment, by T/T, PayPal or Western Union. For seasonal stock held by the buyer, we recommend a 90-day inspection and can supply replacement bags.
Seasonal storage and humidity control
Stock held between seasons sits longer than stock in active circulation, and that makes seasonal storage a different problem from day-to-day storage.
Months in a sealed container
A piece in a sealed anti-tarnish bag with a desiccant sachet can stay bright for six to twelve months. Beyond that, the inhibitor is exhausted and the sachet is saturated, and the piece tarnishes slowly inside a bag that looks intact.
Replacement cycle
Replace the bag and the sachet every twelve months on long-held stock. The cost is small and the alternative is a season that opens with haze on every piece.
Humidity monitoring
A cheap hygrometer in the stock room tells you whether the room is doing the work or fighting it. Above 60 percent relative humidity, no packaging routine holds for a full season, and a dehumidifier becomes the cheaper fix.
Stone-set pieces need one more consideration. A stone with a porous or treated surface can be affected by prolonged contact with an inhibitor sachet, so keep the sachet away from the stone and check a sample after the first month. For a programme holding several hundred pieces, test twenty at the start of the season and inspect them at 30, 60 and 90 days. That gives a trend rather than a single observation, and a trend shows whether the routine is holding.
- Sealed bag plus desiccant for anything held over 90 days
- Replace bag and sachet annually, and label the replacement date on the box
- Keep the room below 50-60 percent humidity and record the reading
- Inspect every 90 days and act on the first haze rather than the first complaint
- Keep stone-set pieces separate from inhibitor sachets in direct contact
Frequently Asked Questions
Does a sealed bag stop tarnish completely?
No, it slows it sharply. Some sulphur remains trapped inside the bag, and the reaction continues slowly. A barrier plus an inhibitor is the practical best case, not a guarantee.
Is tarnish a defect I can claim against a supplier?
Only if the packaging caused it and the packaging was specified. Tarnish from normal storage is not a defect. Tarnish from a sulphur-containing insert in a three-week shipment is a packaging failure and worth raising.
Can I clean a whole order at once?
For unplated silver, yes, with a dip and a rinse. For plated or stone-set pieces, clean individually and check the plating afterwards, because a bulk dip can strip edges unevenly.
Does storing pieces together cause tarnish to spread?
Tarnish does not spread like a contagion, but a tarnished piece releases sulphur compounds that accelerate reaction on pieces nearby. Separating pieces in individual bags removes that effect.
Next step
Ask for the packaging material statement with your next order and run the seven-day test on any new insert. Our production desk supplies both, and the guide index covers plating thickness and cleaning methods.