The metal decision on moissanite sets the retail price band, the returns rate and the repair policy. It is a commercial choice before it is a metallurgical one.

925 sterling silver: the volume base

Sterling is 92.5 percent silver with copper and a trace of other metals. On moissanite, it is the metal that makes a USD 30 to 90 retail price possible, and it is the metal most exposed to tarnish and plating wear.

The two variables that decide quality are alloy source and plating thickness. A good sterling piece with 0.8 micron rhodium outlasts a cheap piece with 0.3 micron by a full season.

Put the forecast window in writing. Capacity priority follows predictability, not friendship.

14K and 18K gold: price band and repair

14K is 58.5 percent gold and is the US mass-market standard. 18K is 75 percent gold, softer, richer in colour, and more expensive to repair. On the same design, the metal line alone can double the cost.

For moissanite sold at USD 300 and above, 14K is usually the right call. 18K belongs in the bridal and heirloom tier.

MetalPurityWearPrice bandBest for
925 silver92.5% AgNeeds platingEntryVolume programs
14K gold58.5% AuGoodMidUS retail core
18K gold75% AuSofterHighBridal, heirloom
Platinum95% PtExcellentHighDaily-wear bridal

Read the table as a checklist rather than a recommendation. The right row depends on the price band, the wear pattern and the channel you sell into.

Write the remedy matrix before the first defect: remake, credit, allowance or rework, each tied to a defect class.

Platinum and palladium: the niche

Platinum is denser, naturally white and needs no plating, which is why it holds up in daily-wear bridal. The trade-off is price volatility and a smaller repair network.

Keep platinum as a made-to-order option on moissanite, not as stock.

How to specify metal so it is enforceable

Write four things: alloy and purity, gram weight per size, stamp, and nickel release standard. Add the assay or XRF check you will run on the first lot.

A metal claim without a gram weight is a claim without a cost basis, and the quote will drift at the first size change.

The cheapest correction happens at the sample. A seat that is 0.2 mm shallow costs a CAD revision at one piece and a rework bill at five hundred.

What to check before the order

Run the five checks below in order. The first two protect the money, the last three protect the launch date.

  • Specify alloy, purity and gram weight per size.
  • Ask for the plating thickness in microns.
  • State the nickel release standard.
  • Run XRF on the first lot.
  • Match metal to the retail price band, not to taste.

If a supplier cannot answer three of the five, treat the quote as a starting point rather than a plan. Ask again in writing and keep the answer with the PO.

Frequently Asked Questions

Is 925 silver good enough for moissanite?

For volume programs at entry price, yes, provided the plating is 0.8 micron or better and the alloy source is named.

Does 18K wear faster than 14K?

It is softer, so it scratches more easily, but it does not tarnish. The repair cost is higher because of the gold content.

What plating should silver carry?

Rhodium for white, and e-coat over rhodium for extra tarnish resistance. Ask for the micron number, not the trade name.

Can I mix metals in one order?

Yes, but expect separate MOQs and separate lead times. Mixed-metal orders also complicate the QC sampling.

How do I verify the gold content?

XRF on the first lot plus the mill certificate. A stamp alone is a claim, not a test.

What is the fastest way to lose money on a first order?

Skip the trial lot and accept an average gram weight. Both hide the problem until rework is at lot scale.

Send the moissanite design and retail price band. We return a metal comparison with gram weight, plating microns and the landed cost at each purity. See the full range at Moissanite and HOLYCOME.

Buyers who get consistent lots are not luckier. They wrote the spec down and checked the first carton against it.