A customer brings a moissanite solitaire back six months after purchase. The stone looks dull, slightly yellow, and not the way it looked in the case. She is worried the moissanite has gone off. Under inspection, the moissanite itself is perfect. What is on it is six months of hand lotion, sunscreen, soap scum, and skin oil bonded to the higher-refractive-index surface. The fix is two minutes of soap and warm water. For retailers, this is the easiest support ticket in the business, and the one that generates the most cheap-stone reviews when ignored. Here is the exact method to teach customers.

Why moissanite shows the film faster than diamond

Moissanite has a refractive index around 2.65 to 2.69, higher than diamond at 2.42. The higher the index, the sharper the contrast between a clean facet and a smudged one. Oil on a low-index stone is barely visible; the same oil on a moissanite facet shows up as a dull patch. This is not a defect; it is physics. The mineral properties are summarized on the Wiki moissanite. A clean moissanite looks like a clean moissanite for about three weeks of daily wear before the film starts to show.

The soap-and-water method

Use a small bowl of warm water (not hot), one drop of mild dish soap without moisturizers or lotion, and a soft baby toothbrush. Soak the ring for two minutes. Brush gently under the girdle and around the prongs where lotion builds up. Rinse under warm running water with the drain closed. Pat dry with a lint-free cloth. That is the whole job. It takes under five minutes and removes the film that makes moissanite look cloudy. For more on what works, see cleaning a moissanite ring and what cleaning solutions to skip.

What to skip

Three things damage a moissanite or its setting. Ammonia-based household cleaners etch the metal and can cloud the anti-scratch polish on cheaper moissanite. Ultrasonic cleaners are safe for the stone but shake loose prongs in a setting that has not been inspected, so skip them until the prong check is done. Steam cleaners can crack a stone that has a hidden feather, and they also loosen prongs. For most customers, warm soap and water is the only method they need. Pair with household items that are safe and home cleaning for an engagement ring.

How often should customers clean?

For a ring worn daily: every two weeks. For a ring worn occasionally: monthly. If the customer works outside, applies sunscreen daily, or has oily skin, weekly is the right cadence. The trigger is visual: when the stone stops throwing sharp flashes, it is time. Cleaning is also the moment to look at prongs. If a prong is wiggly, stop the customer from wearing the ring and send it in. For more on prong and setting life, see when a setting needs replacing.

What support tickets actually look like

The most common moissanite support email is phrased as a complaint: my stone looks cloudy, did I get a fake? In our wholesale returns data, 9 out of 10 of those stones are perfectly graded. The film is lotion, sunscreen, and hand soap bonded to the high-index surface. A two-minute warm-soak restores the stone. The retail fix is a printed card that says this in plain English, not a technical sheet. Customers who see the words cloud and film on the card before they wear the ring do not send the ring back.

For retailers, the cleaning card is also an upsell moment. A customer who comes in for a free soak is a customer who notices the prongs, the matte finish on the band, and the new arrivals in the case. The two-minute soak is not a cost; it is the visit that drives the next purchase. Teach the staff to hand the ring back in a small pouch with a care card, and the customer leaves feeling looked after.

Does moissanite lose its shine over time?

No. The mineral does not degrade. What looks like lost shine is surface film. A soap soak restores it.

Can dish soap damage moissanite?

Mild dish soap without lotion or moisturizer is safe. Avoid dish soaps with added skin conditioners, because they leave a film of their own.

How do I clean under the stone?

The soft toothbrush angled under the girdle is the tool. Do not poke with a pin; you will bend a prong.

Why does my moissanite look yellow after cleaning?

If it still looks yellow after a clean, the stone itself may have a subtle tint from lower-grade moissanite (some economy lines carry a gray-green cast). This is not removed by cleaning.

Can I soak moissanite overnight?

No. Long soaks in soapy water can dry out the adhesive used in some plated settings. Two minutes is enough.

If you are a retailer shipping moissanite stock, our wholesale team includes a printed care card with every order that walks customers through the soap-and-water method. Request care-card inserts.

Frequently Asked Questions

Is moissanite a good diamond alternative for retail buyers?

Yes for price-sensitive customers who want brilliance and hardness. Moissanite ranks 9.25 on the Mohs scale, holds up to daily wear and costs a fraction of a natural diamond of the same size, so it resells fast in bridal and fashion lines.

What is the minimum order for wholesale moissanite?

MOQ starts at 50 pieces per design for stock items. Custom cuts and private-label settings usually start at 100–300 pieces depending on the mold.

Do you provide certificates with moissanite stones?

Yes. Every parcel ships with GRA or IGI documentation listing carat weight, color grade and cut. We recommend passing the certificate to your end customer for trust.

How long does sample and bulk production take?

Samples ship in 3–5 days. Bulk runs take 15–20 days under 500 pieces, and 25–30 days for custom work.