Moissanite is one of the easiest stones to keep brilliant, but it is not immune to the daily film that kills sparkle: hand lotion, soap residue, skin oils, and kitchen grease. A ring that looked bright in the case can look dull on a finger within weeks, and most customers assume the stone has clouded. It almost never has. It is simply dirty.
The safe, daily clean
Mix warm water with a few drops of mild dish soap, soak the ring for 20-30 minutes, then brush gently with a soft toothbrush under and around the prongs. Rinse under running water with the drain covered, and pat dry with a lint-free cloth. That routine removes the film that blocks light return. Moissanite is chemically stable, so plain soap and water will never harm it. For the broader safe-product rules, see which household items are safe for jewelry and the caution list in cleaning solutions to avoid.
Ultrasonic and steam: moissanite is unusual
Many colored stones cannot go in an ultrasonic cleaner because vibrations can loosen or crack inclusions. Moissanite tolerates ultrasonic cleaning well in most cases, which is one reason it is a favorite among jewelers. A commercial steam cleaner is also usually fine. Always check the setting first: if the ring has a glued-in stone, pearls, or any soft companion stone, skip the steam. The gemological context is summarized on the IGI reference. The basic engagement-ring routine in cleaning an engagement ring at home covers the same steps for mixed jewelry.
What to stay away from
Bleach, chlorine, and abrasive toothpaste or baking soda pastes dull the metal finish and can discolor gold alloys. Hairspray, perfume, and lotion should go on before the ring, not after, because they build up a waxy layer on the pavilion. Remove the ring before swimming in a chlorinated pool; chlorine attacks the solder joints in white and yellow gold over time. Store it separately when not worn, as our storage guide in avoiding scratches in storage explains.
How often should you clean it?
Once every one to two weeks for a ring worn daily, with a deeper soak monthly. A stone that suddenly looks dull after a year usually has a loose prong blocking light, not a cleaning problem. If a home clean does not restore the sparkle, send it in for a prong check rather than scrubbing harder.
When to let a professional handle it
A home soak covers 90 percent of dullness, but some issues need a jeweler. If one or more prongs look bent or the stone shifts slightly under a fingernail test, stop wearing it until it is checked; a loose prong can drop a stone before you notice. If the ring has a buildup of hardened sunscreen around the pavilion that brushing will not move, an ultrasonic cycle at the shop lifts it safely. Polishing, rhodium re-plating on a white gold setting, and prong retipping should always be done by a jeweler, since home polishing cloths are too aggressive and can round over a sharp prong.
Make it a twice-yearly habit: have the ring ultrasonically cleaned and the prongs checked at the same visit. That short appointment catches worn prongs years before they fail. For clients who travel, pack the ring in its own padded pouch rather than loose in a wash bag, and bring a small travel cleaning cloth. After a beach holiday, rinse the ring in fresh water to wash off salt and fine sand, because salt water is not harsh on moissanite but fine abrasive sand is. With that routine, a moissanite ring stays at its brightest for the entire time it is worn.
One last tip: a clean microfiber cloth buff after washing removes water spots and finger marks without any product. It takes ten seconds and keeps the stone looking fresh between the deeper soaks, so the ring never sits in a dull state waiting for the next scheduled clean.
FAQ
Can I clean moissanite with ultrasonic?
Yes, most moissanite rings can be safely ultrasonic-cleaned. Confirm the rest of the setting and any companion stones tolerate it before running a cycle.
Why does my moissanite look cloudy?
Almost always it is a film of oil and lotion, not internal clouding. A warm soapy soak and gentle brushing restore the clarity. If not, check for a loose prong.
Will rubbing alcohol damage moissanite?
No. Alcohol is safe on the stone, but repeated use can dry out or dull some finishes and adhesives. Warm soapy water is the preferred method.
How do I clean under the prongs?
A soft toothbrush dipped in soapy water, angled from below, reaches the area where grease collects most. Avoid wire brushes, which scratch metal.
We include a care card and polishing cloth with every wholesale order, and our team can advise on ultrasonic-safe settings. Order with care instructions included.
Rhodium plating, which gives white gold jewellery its bright finish, is covered in the Wikipedia article on rhodium.