A buyer standing in front of your case comparing two 1.00ct round brilliants, one tagged Excellent and one tagged Very Good, is usually looking at a to price gap on the stone alone. The sales conversation that follows tends to be shaky, because most retail staff cannot describe what the cut grade actually changed in the face-up appearance. For wholesale accounts, this gap matters: it decides whether your stock mix moves or sits on the shelf. Here is what the five GIA cut grades really control, and where the premium is invisible.

What the cut grade is actually measuring

GIA grades cut on a round-brilliant scale of Excellent, Very Good, Good, Fair, and Poor. The grade is not a single number; it is a weighted panel of proportions, facet alignment, and finish that the lab reduces to a letter. The four things the eye notices are brightness (white light return), fire (rainbow flashes), scintillation (the moving sparkle pattern as the stone tilts), and contrast pattern (the dark-and-light patches across the crown). Cut grade is documented on the GIA diamond cut-grade page. Carat, color, and clarity are properties of the rough; cut is the only C the cutter decides, and it is the one that most changes how the stone looks on a hand.

Where the cut-grade premium sits

An Excellent round on a 1ct stone typically carries a 12 to 18 percent price premium over a comparable Very Good of the same color and clarity. The premium shows up in three places. First, the crown angle is usually between 31 and 36 degrees and the table between 54 and 62 percent, which is the range where light returns rather than leaking through the pavilion. Second, Excellent stones have tighter girdle tolerance, so the stone does not look thick or dead through the side. Third, the finish (polish and symmetry) is graded Excellent, which matters at video resolution where asymmetric facets catch the phone camera unevenly. A Good grade can be 25 to 35 percent cheaper but is usually a deeper stone that leaks light and looks smaller for its weight.

When Very Good is the right call

Very Good is the value tier most retail buyers should accept. Under a 60-watt bulb at 15 inches, the gap between Excellent and Very Good is not visible to an untrained eye, and it disappears entirely once the stone is mounted in a solitaire. The people who can tell are graders with a master set, and they are not the customers buying bridal off a website. If your client is buying a 1.5ct stone, moving from Excellent to Very Good frees to ,400 that can go toward a half-carat larger stone, a better color, or a nicer setting. For context, pair this with what makes a stone sparkle and ideal versus Very Good cut.

Where buyers get burned on cut

The trap is a stone labeled Excellent on color and clarity but graded Fair on cut. Some listings lead with the color grade (a D or E) and bury the cut. A Fair-cut D stone looks flat, glassy, and smaller than a Good-cut G. Stocking rule of thumb: never lead a bridal piece with color if cut drops below Very Good. The customer will blame the diamond, not the lighting, and return it. For the other Cs, see how color and clarity grades stack and what carat size looks like on the hand.

How much does cut grade affect price?

On a 1ct round, Excellent over Very Good is roughly 12 to 18 percent. Good over Very Good discounts it by 15 to 25 percent. Fair and Poor are 40 to 60 percent off, and they are hard to retail because the stone looks dull even to untrained eyes.

Is a Good cut acceptable for a side stone?

Yes. Side stones in a pave or halo setting are small enough that cut grade is rarely noticed, and Good-cut side stones let you keep the halo bright without doubling the cost.

Does a deeper cut hide color?

It can. A deep pavilion paths light through more diamond, which makes a faint yellow body color slightly less obvious face-up. The trade-off is that light leaks out the side, so the stone looks smaller and duller.

Does cut grading apply to fancy shapes?

GIA grades cut for rounds only. For ovals, cushions, and radiants, labs return a proportions report rather than a letter, which is why those shapes need side-by-side photos when you buy wholesale.

Should I pay for Excellent polish and symmetry?

For round solitaires under 1.2ct, Excellent on both is worth it for video. Above that size, Very Good symmetry is invisible on the hand and saves 4 to 7 percent per carat.

If you are a jeweler or designer buying calibrated rounds in Excellent and Very Good mix sheets, our wholesale team can pull side-by-side photos of two stones before they ship. Request a cut-grade comparison sheet.

Frequently Asked Questions

Is moissanite a good diamond alternative for retail buyers?

Yes for price-sensitive customers who want brilliance and hardness. Moissanite ranks 9.25 on the Mohs scale, holds up to daily wear and costs a fraction of a natural diamond of the same size, so it resells fast in bridal and fashion lines.

What is the minimum order for wholesale moissanite?

MOQ starts at 50 pieces per design for stock items. Custom cuts and private-label settings usually start at 100–300 pieces depending on the mold.

Do you provide certificates with moissanite stones?

Yes. Every parcel ships with GRA or IGI documentation listing carat weight, color grade and cut. We recommend passing the certificate to your end customer for trust.

How long does sample and bulk production take?

Samples ship in 3–5 days. Bulk runs take 15–20 days under 500 pieces, and 25–30 days for custom work.