A Care & Maintenance spec sheet is not paperwork. It is the document every claim, listing and QC decision refers back to. Eight fields make it usable.
Fields one to three: identity
SKU, product name and metal with purity. On Care & Maintenance, the metal line must carry the stamp value, not a marketing word. 'Silver' is not a specification; '925 sterling, 2.1 g' is.
Add the maker's mark if the channel requires it.
Keep the CAD file and the mould receipt. Ownership is a document, not an understanding.
Fields four to six: the physical numbers
Gram weight per size, stone type with size and grade, and dimensions. These three decide cost, look and durability.
On Care & Maintenance, a spec without a per-size weight will drift at the first size change, and the quote will drift with it.
| Field | Example | Used by |
|---|---|---|
| SKU | HC-RG-1042 | Listing, warehouse |
| Metal and purity | 925 sterling | Claim, QC |
| Gram weight | 2.1 g size 6 | Cost, QC |
| Stone | 6.5 mm moissanite | Claim, QC |
| Dimensions | Band 1.8 mm | Design, repair |
| Plating | 0.8 micron rhodium | Durability claim |
| Compliance | Nickel pass, origin CN | Import, platform |
| Version | v3, 2026-11 | All of the above |
Read the table as a checklist rather than a recommendation. The right row depends on the price band, the wear pattern and the channel you sell into.
Set the reorder point from sell-through and lead time, not from the MOQ. Stock cover is a calculation, not a feeling.
Fields seven and eight: finish and compliance
Plating type and thickness in microns, plus the compliance note: nickel, Prop 65 and country of origin.
Those two lines are what make a listing defensible when a platform or a customer asks a direct question.
Keeping the sheet alive
Version every sheet and attach the version to the PO. When a stone or a supplier changes, the version changes.
On Care & Maintenance, most listing errors trace to a sheet that was updated in one place and not another.
The channel decides the tolerance. A boutique forgives a loupe mark; a marketplace does not. Build the inspection standard to the strictest channel you sell.
What to check before the order
Run the five checks below in order. The first two protect the money, the last three protect the launch date.
- Write the stamp value, not a marketing word.
- Give weight per size.
- State stone size and grade.
- State plating in microns.
- Version the sheet with the PO.
If a supplier cannot answer three of the five, treat the quote as a starting point rather than a plan. Ask again in writing and keep the answer with the PO.
Frequently Asked Questions
What must a Care & Maintenance spec sheet include?
SKU, metal and purity, gram weight per size, stone type and size, dimensions, plating microns, compliance note and version.
Why per-size weight?
Because cost follows weight. An average hides the size where the metal line breaks the margin.
Who writes the sheet?
The factory drafts from the lot, the buyer approves against the PO. Two signatures.
How often should it change?
Whenever a material, a supplier or a stone grade changes. Every change gets a version.
Is a spec sheet enough for a listing?
It is the source. The listing still needs the channel-specific fields and the disclosure wording.
How do I know a supplier is reliable?
Two clean repeat lots and two on-time shipments. Before that it is a sample, not a supplier.
Send the Care & Maintenance SKU list. We return an eight-field spec sheet template with the version block and the QC reference. See the full range at Care & Maintenance and HOLYCOME.
The short version: specify the number, seal the sample, inspect against both. Everything else is negotiation.