AQL, Tray Checks and What a QC Report Should Say

Last April, a US buyer of care and Maintenance placed 100 care and Maintenance against a sample signed in August. The first container landed with 9 pieces that failed on tarnish in transit alone, and USD 10-25 landed on the buyer's P&L before a single unit sold, priced at USD 8-44 for the 100-piece Shopify DTC run.

On a 100-piece order at USD 8-44, a tarnish in transit rate above two percent is not a quality surprise. It is a costing error that shows up as a credit note three weeks later.

Care & Maintenance wholesale piece from the HOLYCOME line in Wuzhou

Nothing in the rebuild was expensive. A gauge, a written limit and a retained tray did the work that a discount would only have delayed, and 100 pieces leaves Wuzhou in gift box with sleeve at USD 8-44.

Running care and Maintenance as a Storefront SKU

A storefront lives on photography and return rate, not on the wholesale price. The same care and Maintenance that sells at a boutique counter needs a second and third angle, a scale reference, and one photograph of the clasp or gallery because that is the part a customer cannot see before buying, which is how the Shopify DTC account reads it at USD 8-44.

Returns on jewellery from a storefront cluster around sizing and expectation, not quality. Publishing the millimetre width and the exact gram weight cuts the sizing return before it happens, and a printed care card inside the gift box with sleeve cuts the tarnish complaint, quoted at USD 8-44 per piece in gift box with sleeve.

Shipping weight decides whether you can offer free carriage. At 100 pieces a mixed carton of care and Maintenance usually breaks into individual mailers under four ounces, which keeps a USPS or carrier rate flat instead of dimensional, shipped as gift box with sleeve and certified IGI report.

Care & Maintenance setting and finish detail on a HOLYCOME factory sample

What US buyers Check Before They Sign

At USD 8-44 per piece the four measurements below are worth more than the discount being negotiated. One of them costs nothing to write down.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Plating thicknessNominal only0.20 micron rhodium logged per lot, 3 microns on vermeilWear-through inside one season
Surface porosity after polishSeen after platingCast porosity checked before plating, rejects pulled at that stagePlating blister six weeks later
Stone colour consistencyGraded by eye under D65Colour matched to a retained master stone, per trayRepeat colour complaint in the same SKU
Sizing drift across the runNot measuredGo/no-go gauge on every size, drift held under 0.15 mmResize queue and reship cost

Write these into the Shopify DTC purchase order and the arrival check becomes arithmetic instead of recollection, priced at USD 8-44 for the 100-piece Shopify DTC run.

The Three Failures We See Most in Incoming Samples

rhodium adhesion

A silver surface plated without a palladium strike layer blisters in wear. The strike layer is invisible and essential, quoted at USD 8-44 per piece in gift box with sleeve.

The commercial effect is tarnish claims and replacements, typically USD 4-7 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, quoted at USD 8-44 per piece in gift box with sleeve.

weight shortfall

A 2.1 g ring shipped at 1.85 g passes a casual check and fails a scale. Publish the weighed average per SKU, and the Shopify DTC quote for it sits at USD 8-44.

Our countermeasure is a gauge and a written limit. It adds about 11 seconds per piece and removes the defect from the run rather than from the carton, with IGI report and gift box with sleeve stated on the same sheet.

tarnish in transit

Silver that ships without an anti-tarnish strip browns in a humid container. The strip costs 3 cents and removes the most common arrival complaint, with IGI report and gift box with sleeve stated on the same sheet.

In a 100-piece run this typically shows on 8 of pieces. Catching it means measuring silver assay at 92.5% minimum at the tray level, not inspecting the finished carton, shipped as gift box with sleeve and certified IGI report.

Where USD 8-44 Per Piece Actually Goes

Cost at USD 8-44 leaves no room for assumption. The table shows which line compresses and which line only moves quality down.

Cost lineShareWhat moves it
Base metal or alloy for care and Maintenance30%Alloy choice and casting yield
Stone or melee for care and Maintenance20%Sieve range and lot batching
Setting and finishing labor for care and Maintenance19%Jig design and bench minutes
Plating, polish and QC for care and Maintenance12%Per-tray versus per-piece checks
Packaging for care and Maintenance19%gift box with sleeve

A factory that cannot state its bench minutes per piece has never costed its own line. Ask for minutes and for the reject rule, not for a discount, certified IGI report and packed gift box with sleeve at 100 pieces, which the Shopify DTC file records at USD 8-44 in gift box with sleeve.

Order Terms, Sample Timing and Packing

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 100-piece Shopify DTC order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, priced at USD 8-44 for the 100-piece Shopify DTC run.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 8-44 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the gift box with sleeve format at 100 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, shipped as gift box with sleeve and certified IGI report.

Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of silver assay at 92.5% minimum for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, which is USD 8-44 on the Shopify DTC schedule.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, with IGI report and gift box with sleeve stated on the same sheet.

Alloy, Karat and the Cost of a Color Change

Ask three suppliers of care and Maintenance this question and you will get three answers. Only one of them survives an inspection, and the Shopify DTC quote for it sits at USD 8-44.

What buyers underestimate on care and Maintenance is the cost of the interruption, not the cost of the piece. A missing 6% of a run stalls a launch, and a stalled launch costs more than the 6% ever did, and 100 pieces leaves Wuzhou in gift box with sleeve at USD 8-44.

We plan a 3-5% buffer on first runs of care and Maintenance and tell the buyer it exists. Hiding a buffer and shipping it as production is how a supplier trains a buyer to distrust the count, quoted at USD 8-44 per piece in gift box with sleeve.

What a Report Proves and What It Does Not

On care and Maintenance, the difference between a 40-day order and a 90-day order is usually two signatures, not a factory delay, which the Shopify DTC file records at USD 8-44 in gift box with sleeve.

The commercial version of this question for care and Maintenance is simple: what does a failure cost the buyer, and who pays it. In our terms the answer is a replacement inside the same order cycle, with the retained reference tray as the arbiter, certified IGI report and packed gift box with sleeve at 100 pieces.

That clause matters more than a discount on care and Maintenance. A 4% lower unit price disappears on the first rejected tray; a written responsibility clause does not, which the Shopify DTC file records at USD 8-44 in gift box with sleeve.

What This Means for a First Order

A first Shopify DTC order of 50 pieces per design at USD 8-44 tests the line rather than the range. Three designs covers the shelf.

Ask for the retained tray and the IGI report batch sheet with the first shipment. Both are free and both decide the reorder, which the Shopify DTC file records at USD 8-44 in gift box with sleeve.

How a Repeat Order Gets Built

Nothing in this sequence is unusual, and that is the point. Each step exists because skipping it produced a specific failure on a previous order, the figure being USD 8-44 for a 100-piece run.

  1. Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
  2. Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
  3. Approve the sample in writing, including the reject rule and the retained reference tray.
  4. Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
  5. Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.

Reorders inside this sequence run 12-15 days because the model, the gauge set and the signed spec stay in our system, shipped as gift box with sleeve and certified IGI report, shipped as gift box with sleeve and certified IGI report.

Freight, Duty and the Arrival Check

Export runs through Guangzhou or Shenzhen. Air lands in 5-8 days on the US west coast, 7-10 on the east, and sea takes roughly three times the transit, and at USD 8-44 for 100 pieces that is the number the buyer signs.

FOB is the default on care and Maintenance and DDP is the option. Buyers new to North American retail usually take DDP once, then switch after they see the breakdown, which is USD 8-44 on the Shopify DTC schedule.

If tarnish in transit appears in the arrival check, the retained tray decides who owns it. Keep the IGI report batch sheet in the same folder as the packing list, and 100 pieces leaves Wuzhou in gift box with sleeve at USD 8-44.

Frequently Asked Questions

How long does a reorder of the same care and Maintenance take?

With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, on a 100-piece Shopify DTC order at USD 8-44.

What finish do you use, and how thick is it?

Rhodium at 0.20 micron minimum on white care and Maintenance, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, with IGI report and gift box with sleeve stated on the same sheet.

How is care and Maintenance packed for gift box with sleeve?

Every unit goes into a foam-backed pouch, then the gift box with sleeve, then the outer carton at 100 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, quoted at USD 8-44 per piece in gift box with sleeve.

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, and 100 pieces leaves Wuzhou in gift box with sleeve at USD 8-44.

How long does a reorder of the same care and Maintenance take?

With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, on a 100-piece Shopify DTC order at USD 8-44.

Next Step

The next step is a sample in 3-5 days, not a container. Write to service@holycome.com or WhatsApp +86 18078079070, subject Shopify DTC, and the Shopify DTC quote for it sits at USD 8-44.

HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, which is how the Shopify DTC account reads it at USD 8-44.

Related reading: Care & Maintenance Bridal Boutique: Carton Cube, Duty and the Freight Line That Surpr - HOLYCOME Wedding Rings Vermeil Upgrade: MOQ, Mixed Designs and the Real First Order - HOLYCOME