Material language on Care & Maintenance is full of words that mean less than they sound: 'gold plated', 'premium silver', 'long-lasting finish'. Here is what each actually means in a specification.

Base metals

Brass and copper alloys are the base for most plated fashion jewelry. Sterling silver is 92.5 percent silver. Gold is stated as a karat, which is a purity fraction, not a colour.

On Care & Maintenance, the base metal decides the weight, the price floor and the nickel risk. Ask for it by name, not by category.

Put the forecast window in writing. Capacity priority follows predictability, not friendship.

Plating and its vocabulary

Gold plated means a gold layer of some thickness; it says nothing about how thick. Gold filled means a bonded layer with a defined fraction of gold by weight, which is a stronger claim.

Ask for microns on plated and for the fraction on filled. Without a number, the word is marketing.

TermMeansAsk for
Gold platedA gold layer, thickness unstatedMicrons
Gold filledBonded layer, fraction by weightGold fraction
Sterling92.5% silverStamp and weight
Brass baseCopper-zinc alloyNickel test
Satin finishDirectional brushFinish sample

Read the table as a checklist rather than a recommendation. The right row depends on the price band, the wear pattern and the channel you sell into.

Put the forecast window in writing. Capacity priority follows predictability, not friendship.

Finishes: polished, satin, brushed, antique

Each finish changes the wear pattern. Polished shows scratches first; satin and brushed hide them longer; antique oxidises the recess and needs a stable plate underneath.

On Care & Maintenance, match the finish to the wear pattern of the category, not to the photo.

What to write in the spec

Base metal, purity or karat, gram weight, plating type and microns, finish, and the nickel standard. Six lines that make every material claim checkable.

A material claim that cannot be checked is the one that gets challenged.

Most claim conversations end when the measurement is sent. Calipers and a 0.01 g scale settle in one email what adjectives settle in five.

What to check before the order

Run the five checks below in order. The first two protect the money, the last three protect the launch date.

  • Name the base metal in the spec.
  • Ask for microns on every plating claim.
  • Ask for the gold fraction on filled.
  • Match finish to the wear pattern.
  • State the nickel standard.

If a supplier cannot answer three of the five, treat the quote as a starting point rather than a plan. Ask again in writing and keep the answer with the PO.

Frequently Asked Questions

What is the difference between gold plated and gold filled on Care & Maintenance?

Plated is a layer of unstated thickness; filled is a bonded layer with a defined gold fraction by weight. Filled is the stronger claim.

Is sterling silver always better than brass?

Not for every price point, but it is a stronger material claim. Brass with a good plate can be honest if it is described as brass.

What does 18K mean?

Seventy-five percent gold by weight. The colour depends on the alloy, not on the karat alone.

Which finish hides scratches best?

Satin and brushed hide fine scratches; polished shows them first.

How do I verify a material claim?

XRF on the first lot plus the mill certificate. A stamp is a claim, not a test.

How many suppliers should I keep?

Two approved sources for the top three designs, one for the tail. The second source is what keeps pricing honest.

Send the Care & Maintenance material list. We return a plain-language specification with the six lines and the test each line needs. See the full range at Care & Maintenance and HOLYCOME.

Buyers who get consistent lots are not luckier. They wrote the spec down and checked the first carton against it.