Care advice for Care & Maintenance is usually written for the customer. This one is written for the seller, because the care card you print decides the return conversation six months later.

The daily routine

Put Care & Maintenance on last and take it off first. That single rule removes most contact with perfume, hair product and cleaning agents, which are the three causes of plating and stone discolouration.

Wipe with a dry soft cloth after wear. Do not polish plated goods with a rouge cloth; it removes microns.

Ask for the plating thickness in microns, then test the contact points on the first lot. A thirty-second cloth rub shows colour transfer before a customer does.

Storage that prevents scratches

Store separately in a pouch or a compartment, with the piece closed. Chains go flat, rings go in a slot, earrings go in pairs.

On Care & Maintenance, scratches come from other jewelry more often than from daily wear.

RiskCausePrevention
TarnishHumidity, sulfurDry storage, e-coat
Plate wearFriction, chemicals0.8+ micron, wipe after wear
ScratchesContact with other piecesSeparate storage
Stone dullnessSoap and lotion filmWarm water, soft brush
Clasp failureRepeated strainClasp check at sale

Read the table as a checklist rather than a recommendation. The right row depends on the price band, the wear pattern and the channel you sell into.

Photograph the first article before the batch runs. A shifted seat or a short prong is cheapest to fix at one piece.

What to avoid, specifically

Chlorine, hot tubs, household cleaners with ammonia, and ultrasonic cleaners on plated or treated stones. Ultrasonic is fine on plain metal, not on a plated piece.

An ultrasonic cycle on a thin plate can lift the finish at the prong tips in one pass.

The care card that reduces returns

Four lines: put on last, wipe after wear, store separately, avoid chlorine. Then one line on replating: what the service costs and how long it takes.

A care card with a replating path turns a complaint into a service. On Care & Maintenance, that is the cheapest retention tool you have.

Price moves with three inputs: alloy, stone and plating. A quote that holds for ninety days is a quote that has priced those three honestly.

What to check before the order

Run the five checks below in order. The first two protect the money, the last three protect the launch date.

  • Put jewelry on last, take it off first.
  • Wipe with a dry cloth after wear.
  • Store each piece separately.
  • Avoid chlorine and ammonia.
  • Print a replating path on the care card.

If a supplier cannot answer three of the five, treat the quote as a starting point rather than a plan. Ask again in writing and keep the answer with the PO.

Frequently Asked Questions

How should Care & Maintenance be cleaned?

Warm water with a drop of mild soap and a soft brush, then dry with a cloth. No ultrasonic on plated or treated pieces.

Why does plating wear at the shank?

It is the contact point. Thickness and a dry wipe after wear are the two controls.

Can I use a silver polishing cloth?

On unplated sterling, yes. On plated goods, no; it removes the plate.

How should jewelry be stored?

Separately, closed, dry. A pouch per piece prevents both scratches and tarnish.

Should the care card mention replating?

Yes, with a cost and a turnaround. It converts a future complaint into a service.

What is the fastest way to lose money on a first order?

Skip the trial lot and accept an average gram weight. Both hide the problem until rework is at lot scale.

Send the Care & Maintenance materials. We return a four-line care card plus the replating wording for your packaging. See the full range at Care & Maintenance and HOLYCOME.

None of this is exotic. It is a document, a measurement and a date, repeated until it becomes a process.