Diamond ranks 10 on the Mohs scale, the hardest natural substance known. Buyers reasonably assume that means it cannot break. It can. Every year, jewelers repair chipped engagement rings, and almost always the chip happened on a ring the owner thought was indestructible.
Understanding why diamonds chip is the first step to keeping yours intact.
Hardness is not toughness
The Mohs scale measures scratch resistance, not impact strength. Diamond resists being scratched by anything other than another diamond. But its crystal structure has four directions of natural weakness called cleavage planes. A sharp, focused blow — think a ring edge knocking against a granite counter — can send a crack along one of those planes.
Gradual pressure does not do this. A sudden, hard knock on the right spot does.
Where chips happen most
- The girdle edge. The thin outer rim of the diamond, especially on stones with a very thin or "knife-edge" girdle.
- The culet. The tiny point or facet at the very bottom, which can chip if the stone shifts in its seat.
- Sharp corners. Princess, emerald, and marquise corners are the classic casualties. Rounds, with no sharp points, chip less often.
Our shapes comparison notes which outlines are structurally more fragile than others.
The most common real-world causes
- A loose stone in worn prongs. When a prong bends or wears thin, the diamond tilts. One hard knock and the girdle takes the impact.
- Working with your hands. Gardening, lifting, gripping a heavy door frame, gym work — the ring edge absorbs the shock.
- Knocking the ring against a hard surface. Counters, table edges, tiled floors. You feel a bump but barely notice it at the time.
- Thin-girdled stones. Ultra-thin girdles look good on paper but are structurally less forgiving.
What to do if your diamond chips
A chip is usually visible as a small white nick or a bright line where light catches the broken edge. If it happens:
- Stop wearing the ring. A chipped feather can propagate further with wear.
- Skip the ultrasonic and steam cleaner. Vibration and heat can widen an existing crack.
- See a jeweler promptly. They will assess the chip under magnification and tell you whether it is structural or cosmetic.
Your repair options
There are essentially three paths:
- Re-cut and polish. The jeweler trims away the chipped area and re-polishes the facet. This removes a small amount of carat weight — often 0.05 to 0.2 carats depending on the stone — but restores a clean, durable edge. It is the standard fix.
- Move the stone in the setting. A chip on the girdle edge can sometimes be tucked under a rebuilt prong, hiding it from view. This is cosmetic, not structural, and works only for small nicks.
- Replace the stone. If the chip is deep or the stone is small, replacement in the same setting may be the cleaner economic choice. For the process of what happens when a stone is lost, our lost-stone guide covers the similar decision path.
Preventing the next chip
- Check your prongs every few months. Our home prong check takes two minutes.
- Take the ring off for heavy manual work, sports, and lifting.
- When choosing a stone, favor a medium-to-slightly-thick girdle over a knife-edge one.
- Insure the ring for accidental damage. Most jewelry policies cover chipping from a sudden impact — our jewelry insurance guide explains what to look for.
Diamonds chip, but rarely by surprise. The chips that happen are almost always on loose stones, on thin girdles, or on rings worn through years of rough work without a prong check. Look after the setting, know your stone's weak edges, and a diamond can genuinely last a lifetime.
Making an insurance claim
If your ring is insured and the chip happened in a sudden, accidental event, the claim process is usually straightforward. You will need the original appraisal, photos of the chipped stone under magnification, and a quote from your jeweler for either re-cutting or replacement. Policies vary on whether they cover re-cutting versus stone replacement, so read the fine print before you need it. Our insurance guide walks through the typical coverage options.
Choosing a chip-resistant shape
If you are still choosing a stone and you work with your hands, shape matters. Round brilliants have no sharp points and take knocks better. Princess and emerald cuts, with exposed corners, need stronger corner protection — usually V-shaped prongs. A bezel setting, which wraps metal around the girdle, is the most chip-resistant option of all, and is worth considering for a ring worn daily through manual work. Prong checks twice a year, ring-off during heavy work, and a slightly thick girdle on the stone itself are the three habits that prevent most chipping before it starts.
Carat weight conventions cited here follow the Wikipedia entry on carat weight.
Frequently Asked Questions
Is moissanite a good diamond alternative for retail buyers?
Yes for price-sensitive customers who want brilliance and hardness. Moissanite ranks 9.25 on the Mohs scale, holds up to daily wear and costs a fraction of a natural diamond of the same size, so it resells fast in bridal and fashion lines.
What is the minimum order for wholesale moissanite?
MOQ starts at 50 pieces per design for stock items. Custom cuts and private-label settings usually start at 100–300 pieces depending on the mold.
Do you provide certificates with moissanite stones?
Yes. Every parcel ships with GRA or IGI documentation listing carat weight, color grade and cut. We recommend passing the certificate to your end customer for trust.
How long does sample and bulk production take?
Samples ship in 3–5 days. Bulk runs take 15–20 days under 500 pieces, and 25–30 days for custom work.